I dont know why they have to lie about it. At $5/8ft board you'd think I paid for the full 1.5. Edit: I mixed up nominal with actual.
Shouldn't the normal size be 2? Given, well, the name?
this post was submitted on 07 May 2024
713 points (95.2% liked)
Mildly Infuriating
35735 readers
2320 users here now
Home to all things "Mildly Infuriating" Not infuriating, not enraging. Mildly Infuriating. All posts should reflect that.
I want my day mildly ruined, not completely ruined. Please remember to refrain from reposting old content. If you post a post from reddit it is good practice to include a link and credit the OP. I'm not about stealing content!
It's just good to get something in this website for casual viewing whilst refreshing original content is added overtime.
Rules:
1. Be Respectful
Refrain from using harmful language pertaining to a protected characteristic: e.g. race, gender, sexuality, disability or religion.
Refrain from being argumentative when responding or commenting to posts/replies. Personal attacks are not welcome here.
...
2. No Illegal Content
Content that violates the law. Any post/comment found to be in breach of common law will be removed and given to the authorities if required.
That means: -No promoting violence/threats against any individuals
-No CSA content or Revenge Porn
-No sharing private/personal information (Doxxing)
...
3. No Spam
Posting the same post, no matter the intent is against the rules.
-If you have posted content, please refrain from re-posting said content within this community.
-Do not spam posts with intent to harass, annoy, bully, advertise, scam or harm this community.
-No posting Scams/Advertisements/Phishing Links/IP Grabbers
-No Bots, Bots will be banned from the community.
...
4. No Porn/Explicit
Content
-Do not post explicit content. Lemmy.World is not the instance for NSFW content.
-Do not post Gore or Shock Content.
...
5. No Enciting Harassment,
Brigading, Doxxing or Witch Hunts
-Do not Brigade other Communities
-No calls to action against other communities/users within Lemmy or outside of Lemmy.
-No Witch Hunts against users/communities.
-No content that harasses members within or outside of the community.
...
6. NSFW should be behind NSFW tags.
-Content that is NSFW should be behind NSFW tags.
-Content that might be distressing should be kept behind NSFW tags.
...
7. Content should match the theme of this community.
-Content should be Mildly infuriating.
-At this time we permit content that is infuriating until an infuriating community is made available.
...
8. Reposting of Reddit content is permitted, try to credit the OC.
-Please consider crediting the OC when reposting content. A name of the user or a link to the original post is sufficient.
...
...
Also check out:
Partnered Communities:
Reach out to LillianVS for inclusion on the sidebar.
All communities included on the sidebar are to be made in compliance with the instance rules.
founded 2 years ago
MODERATORS
You'd think so, but no.
Short story is the 'nominal' size is the size before going into a planer to smooth the faces.
Yes, it makes little sense, like many things related to construction stuff.
Yeah sorry. The tree was originally 50ft tall so we call the pieces that. But you only get 3ft
Is like buying 1200lbs steaks because that's what the cow weighs before it gets parted
Better example would be raw vs cooked weight of a 1/4lb paddy.
Exactly. Because it is easier to weigh the correct amount before cooking than find out you were wrong after.
But you should probably be feeding Patrick more.
That's a very small area to grow rice in.
load more comments
(1 replies)
load more comments
(13 replies)
The two-by-fours at your local home center are not 2 inches thick or 4 inches wide...not anymore at least. They spent several weeks at that size though. The sawmill cut them to that size to stack and kiln dry, and then when removed from the kiln they are then milled straight and square. Used to be they would sell the rough stock to carpenters who would do the milling themselves, but then they figured out that the railroads were charging them a fortune to ship a lot of wood that was going to be ground to sawdust anyway, so they started milling the boards before shipment. Same amount of construction lumber arrives at the construction site and it took less fuel for the locomotive to deliver it.
they are then milled straight and square
Lol. Trying to find lumber that's straight and square is a pipe dream these days.
It was straight and square when it was milled. Problem is that the big box stores cut corners during the kiln drying phase, so the boards have a ton of moisture still in them. As that dries, the boards twist and cup.
Plus poor protection from the elements at each storage step, which means rapid temp changes, which also causes wood movement.
Go to a local lumber yard. They tend to do a better job at kiln drying. You're still going to have warped boards, but far fewer in my experience.
load more comments
(3 replies)
load more comments
(5 replies)
Lumber is weird because it has been industry standard to lie about dimensions since before the US existed so it’s just kinda a thing they get to do
No its not Maybe in the US? At least here, it is and has to be, very precise especially when it comes to industry quality. It is precise down to the mm!
load more comments
(23 replies)
It's not exactly a lie, just a standard. Nominal board sizes were based on the unfinished lumber size. Another 1/4 inch is taken off each side to get a smooth surface that makes it easier to work with.
Here's an old image (reddit warning)
that shows the rough cuts of boards from a log. When they look at a log, they determine how many of each size they can get from it, and at that point, a 2x4 is 2 inches by 4 inches.
Why does the consumer need to know the dimensions at harvest when it's been processed multiple times?
That's like calling an 4oz can of evaporated milk a gallon because it came from a gallon of milk before processing (I have no clue on the ratio)
load more comments
(13 replies)
load more comments
(2 replies)
load more comments
(5 replies)
As if american measurements have ever made sense. Look up how they measure screws or wires and despair.
Or shotgun shell sizes and loads.
"It all started in 1840 when the dram was a common unit of measurement..."
load more comments
(1 replies)
load more comments
(20 replies)
The convention is 2" before milling. Milling takes off 1/4"on each side, so the result is 1.5".
load more comments
(3 replies)
They were when the name was made, but due to changes in the manufacturing process, they aren't anymore. The name stuck, though.
https://www.popsci.com/two-by-four-lumber-measurements-explained/
load more comments
(3 replies)
load more comments
(8 replies)
Is nobody gonna call out OP for wearing socks with sandals? ...and, ostensibly, while preparing to do carpentry?!?
That's like a cardinal sin squared!
Nah nothing wrong with wearing socks with sandals when you’re home. Do what ever the hell you want.
But I do agree with wearing proper footwear while doing dangerous things.
load more comments
(3 replies)
Can't you see those are safety sandals. And just like safety squints, are approved PPE across the whole 3rd world industrial sphere. OP will be perfectly safe.
load more comments
(1 replies)
load more comments
(11 replies)
Um, wait. I would think that violates some sort of law (but I guess maybe we haven't codified this?). I mean, building plans expect standards in materials, right? So how can a building meet codes if the materials are not within the expected specs?
Agreed, seems like some kind of weights and measures violation.
I'm going to guess they can get away with this because 2x2s aren't intended for structural use. I've never built one into a floor, wall or ceiling.
load more comments
(48 replies)
It's probably 2x2PT or something. There are standards for board widths.
load more comments
(9 replies)
2x2PT has been 1.25x1.25 for as long as I can remember (10 years or more). It's only the pressure treated deck stuff for railings. This does not apply to the rest of the 2x lumber, as those are still 1.5 actual. I got Simpson corner 2x2 brackets for crazy cheap way back but ended up not really using them. The 2x2s are warped to hell and a ripped 2x4 was too big in the original 2x dimension.
I'm wondering if it's a regional thing? I just looked online for pressure treated 2x2's and all the ones I'm seeing (home hardware, home depot, advantage lumber, etc) list as actual being 1.5x1.5
load more comments
(2 replies)
Why is 2x2 meant to be 1.5x1.5 and not 2x2?
Premill size vs sale size. Something like that. Probably not the correct term.
Similar to how steak is measures in precooked weights.
2x4 is the rough cut dimensions from the sawmill. They end up smaller after drying (wood can hold a lot of water) and planing.
*Planed/straight wood versus raw lumber. It threw me off when I first started building stuff and summed that a 2x4 was actually 2"x4" in all my measurements/plans
*Or it would be straight if you're lucky and don't pick from the top of the bin at Home Depot
load more comments
(1 replies)
It's still a bit small, but pressure treated being a little smaller than framing lumber is not necessarily a secret:
I appreciate you covering your open toes, safety socks so you’re compliant.
load more comments
(1 replies)
How is it in countries using the metric system ?
in France :
https://www.mara-materiaux.com/bois-de-charpente/8094-lambourde-38x63-mm-long4-m-traite-9202001090740.html
LAMBOURDE 38x63 mm long.4 M TRAITE Unité de vente : le mètre linéaire 1.42 € /m
5.68 € /(4 m)
So, this is aprox ($6.?) for one "...2x3x(~13ft)..."
(treated wood)
... verry expensive, yet, upfront size disclosure.
Pretty much all of Europe lists wood in exact size of the cut that you get. It sounds highly illegal to call it a 5x5cm piece of wood and sell some other random smaller size.
load more comments
(1 replies)
view more: next ›