this post was submitted on 26 Aug 2023
78 points (96.4% liked)

3DPrinting

15782 readers
1044 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
 

I am a hobbyist, and my job will probably never require me to design and print anything for work.

I do really enjoy the process of conceptualizing, designing, and printing, and have done so for myself and some close acquaintances.

I've spent many hours/days learning the tools of the trade and was wondering if there was an opportunity to make some money as a side gig. Has anyone been successful doing this, and how did you go about it?

Here are a couple of my early designs, I plan to upload more once I clean things up a bit.

https://www.thingiverse.com/landon8848/designs

top 50 comments
sorted by: hot top controversial new old
[–] [email protected] 35 points 1 year ago (2 children)

It is illegal to counterfeit money, and my printer is resin, not paper or metal. So... no.

[–] lando55 31 points 1 year ago (1 children)
[–] [email protected] 17 points 1 year ago (2 children)

Jokes on you. I'm on Kbin.

[–] [email protected] 8 points 1 year ago

There's dozens of us

load more comments (1 replies)
[–] [email protected] 3 points 1 year ago* (last edited 1 year ago) (2 children)

Canada uses plastic money. Is it illegal to counterfeit another country's money? 🤔

load more comments (2 replies)
[–] [email protected] 30 points 1 year ago (2 children)

I tried, but we have paper based currency notes in my country and PLA notes were a dead giveaway, no shops accepted them sadly

[–] [email protected] 12 points 1 year ago (1 children)

You see, the pro move is to print a credit card. Plastic all the way!

[–] [email protected] 3 points 1 year ago

I'll be damned!

[–] [email protected] 3 points 1 year ago

Print Canadian currency—it actually is plastic these days. 😅

[–] [email protected] 27 points 1 year ago (1 children)

No my printer only eats money.

[–] [email protected] 9 points 1 year ago

.. and poops out failed prints/spaghetti?

[–] [email protected] 20 points 1 year ago* (last edited 1 year ago)

There are still people not into FDM that could profit from it so there is still a market:

  1. Run a local business that offers quick turnarounds. e.g. send it before 6 p.m. and production will start before 8 p.m. same day with early morning delivery if possible: The engineer finishes a design in the afternoon and has it the next morning on his desk ready to go. On your end it means once you get home do a little work. Sleep and deliver the order on your way to work.
  2. The next strength is service. You run it. You know the process. You can guide them and answer any questions they have.
  3. Offer basic CAD design work. This allows you to catch customers who have ideas but not the required knowledge.
  4. underpromise, overdeliver
  5. If you are into CNC milling offer hybrid manufacturing. Gain excellence and you have some very valuable knowledge.
  6. Don't take money out of the business at the start. Build up a reserve for the rainy day that will come (!!!) and keep reinvesting in new capabilities or improving your current offering. Once you reach a decent machine park pay yourself. Don't forget to dedicate some funds for experiments: Keep innovating as otherwise you will fall behind and some new guy that's hungry will replace you.
[–] [email protected] 19 points 1 year ago (1 children)

I never bothered with it but I'm sure you could. I just public domain everything I design since it's a lot of older automotive stuff and I'd rather it be readily available.

[–] lando55 9 points 1 year ago (1 children)

I can respect that. If it's something I've designed and made for my own use I make it freely available, but if someone I know comes to me asking, "hey is it possible to build X" then there should at least be a couple of beers in it

[–] [email protected] 6 points 1 year ago

Oh yeah definitely commissions are a whole other ball game they should at least pay for the filament needed to R&D it and ideally do something for your time

[–] 4lan 14 points 1 year ago* (last edited 1 year ago)

I created one product (Frog Case) and people on Reddit were asking me to print it for them. Made a Shopify to make it easier and now I sell dozens of my original designs on there. (Frogcase.store)

Lately I make custom phone cases for the Galaxy Fold series

On average I make $300 a month, but highest sales month was $1k

[–] [email protected] 13 points 1 year ago (1 children)

When I see prices for 3D printing service it always looks unprofitable to me. People saying filament cost only 10$ means nothing to me. My time and knowledge, electricity, initial machine cost, maintainence, dealing with failures, postprocessing... then I see big printing farms...oh thats why! I just love it as a hobby 😄

3D modeling on the other hand can be super profitable

[–] [email protected] 4 points 1 year ago

Because it's the harder skill, IMO. People find out I can print and start asking for really custom stuff, like all I have to do is picture it in my head and it will print.

I can draw a little in CAD, because that's part of my day job. But I don't know how to make a model of Mario dabbing.

[–] [email protected] 12 points 1 year ago (4 children)

I haven't sold anything but I've been seriously considering it after creating some RGB LED lamps. My main reservation is putting myself at risk by selling something that uses electricity to the general public. I'm sure the first moron who jambs a screwdriver into the powered leads and starts a fire will try to sue me.

[–] [email protected] 9 points 1 year ago

Grey area would be selling the plastic part and let the customer source a broadly available electronics/LED. The next option is design work and let somebody else figure out what is in demand and how to sell it.
For example, design it with LED strip in mind and have a small storage compartment for the controller and a strain relief in your print for the cable/connector to socket into.

[–] [email protected] 8 points 1 year ago

If you’re just doing Etsy or eBay, don’t worry. Just put “at your own risk”

It if you’re going to do a whole branding thing, just get an LLC, or whatever the equivalent is if you’re outside of the US.

[–] lando55 3 points 1 year ago

Wow, yes that's definitely something to consider. Even if you put language in there like, "DO NOT PUT LEDS IN THIS OR GET IT NEAR ELECTRICITY, ONLY FOR DEMONSTRATION AND TRAINING" there's no way to prevent someone from suing you for any reason...

[–] c0mbatbag3l 3 points 1 year ago

"Our hardsuits have kinetic barriers. Your level briefs don't, and I'm in a hurry."

[–] Hazdaz 10 points 1 year ago (1 children)

What you are describing is simply being a design engineer. That's what I do and I take on side projects once in a while. It's not worth my time to simply 3D print things for people. The printer is simply a tool used for prototyping.

[–] [email protected] 3 points 1 year ago (1 children)

How do you come across those side projects?

[–] Hazdaz 4 points 1 year ago

They sometimes find me. Friend of a friend knows someone who needs some stuff designed. That kind of thing.

[–] [email protected] 10 points 1 year ago (1 children)

I have made a total of $100 CAD over the course of... 5 months by selling a $10 plastic tool for strollers on Facebook marketplace. These were printed at my local library before I ever owned my own printer.

Now that I do own my own printer, I've just been enjoying printing very long prints that I couldn't at the library.

All that said, there are niche markets where you can fill a need and you can earn some slush fund money without taking on much stress.

[–] lando55 7 points 1 year ago

This is exactly what I was thinking. Most of my designs are for very niche markets and hobbies, purely for enjoyment and to help people out.

I don't want to make it my full time job or anything, but $100 over 5 months would just about cover the cost of filament, so I'd be happy with that ;)

[–] [email protected] 9 points 1 year ago (1 children)

Ive made a little over a grand with my ender 3 making little display signs and stuff for local businesses.

[–] lando55 5 points 1 year ago

How did you get this going? Were these business you frequented or did you do any marketing?

[–] Divus 9 points 1 year ago

Yes, I make some money but barely enough to be worth it.

I sell some specially fixturing to my work. Sell them $30-50 each. Sold a dozen or so over the last 7 years and 3 printers.

Started selling on Etsy about a year ago and Xmas I made a decent amount very fast(about $500 in a month). After the new year it dropped to near nothing until recently I’m getting some sells. Everything I sold was my own designs, but it’s a race to the bottom on there. Far to many people stealing from Thingiverse and selling at a near loss. After Etsy takes its cut which can be a decent chunk your left with near nothing after materials and shipping. Expect $2 to $3 a hour of print time. I am barely in profit to be honest selling there.

[–] pixeltree 9 points 1 year ago (1 children)

I think I could do an etsy shop and print video game props for people pretty profitably, but I'm afraid of turning a hobby into a job and sucking the fun out. I might try doing a really low volume just to have the occasional printer upgrade pay for itself.

load more comments (1 replies)
[–] IMALlama 8 points 1 year ago (1 children)

The two most common ways to make money with a 3D printer: sell your own designs, like you're currently doing, or mass print trinkets/popular items. I suspect you have greater odds of making money in the second category, but I also suspect some people have made a decent amount of money in the first category.

[–] lando55 6 points 1 year ago (1 children)

Having such niche interests like I do is a double edge sword - there are always opportunities for you come up with something new and innovative, but the target market is also very limited.

I'm happy to stay in the first camp and design things that are helpful to these smaller communities, but I need some way to justify these long hours and miles of filament I put into development 😅

load more comments (1 replies)
[–] [email protected] 8 points 1 year ago

Not making any money with it but the 3D printer is helping us make money.

I'm working with a windows and door manufacturer that has around 80 employees.

The owner got a 3D printer that runs pretty continuously for at least 30% of the time I would say.

We are doing a lot of drill or assembly jigs with it. We are also sometimes doing assembly parts for custom projects.

Like someone really wants to make something's with weird angles or hardware that are not compatible together then we can throw a 3D printed part in it to make it work.

[–] RegalPotoo 7 points 1 year ago

Not money as such, but being able to talk about printing made it easier to hang out with one of the production engineering teams at work - their Friday drinks are pretty fun, and the manager has a pretty liberal understanding of what "business expense" means

[–] frickineh 7 points 1 year ago (8 children)

So I don't 3D print, and I just happened to come across this thread scrolling all, but on the flipside, is there a good way to commission someone to do smaller jobs? I embroider and the available floss bobbin options are a total suckfest. I would happily pay for some better ones, but I don't know how to even find someone to give my money to?

[–] lando55 7 points 1 year ago* (last edited 1 year ago) (1 children)

Pre-edit: I just realized I never actually answered your question. I honestly don't know how most people go about finding someone to design and prototype, but judging by some of the responses here I think we'll get some good advice. Feel free to contact me directly if you want me to look into the draft.

What has been super helpful to me iwhen people come to me with requests is to send me the most detailed diagrams or images of any currently available offerings or a combination of them so I have a good starting point.

As a specific example, someone asked me to design a handheld door lock retainer to practice lockpicking. The overall shape and ergonomic design were up to me, but this image was provided which included very specific measurements for the lock:

load more comments (1 replies)
[–] [email protected] 4 points 1 year ago

If you can source an stl file or similar for what you want printed. For really small batches, there are people on Etsy who do commissions.

[–] surewhynotlem 3 points 1 year ago

Check your local library system. One of mine has a 3d printer for use.

load more comments (5 replies)
[–] GodzillaSpark 7 points 1 year ago* (last edited 1 year ago)

I printed some stuff that I thought was cool and just put it up on Etsy early this year at a price that would be worthwhile for me. I was shocked when the first order came in as I never thought anyone would buy it. Then the orders kept coming in and I’ve grossed about 6k so far on Etsy. It’s nice that all of my hobby equipment and filaments are paid for and that’s all I’m looking for.

I continue to randomly list stuff that I think is cool. Sometimes they sell and sometimes they don’t and that’s fine. I don’t do SEO or research keywords or advertise. If I get bored of selling prints one day then I’ll just stop.

And printing is the least time consuming part of the process. It’s the packing and taking it to the post office that takes up the most time.

[–] [email protected] 7 points 1 year ago

I make money, but I produce entire products that use a 3D printed enclosure along with electronic components and code that I write. Just trying to sell something you printed seems like a terrible business plan.

[–] LazaroFilm 5 points 1 year ago (3 children)

I design, print and sell accessories for filmmaking and Steadicam.

load more comments (3 replies)
[–] [email protected] 4 points 1 year ago (1 children)

I made like €25 (revenue, not profit), does that count? Profit is in the negative.

load more comments (1 replies)
[–] [email protected] 2 points 1 year ago

Im making the filament vendors money does that count?

[–] pm_me_your_panties 2 points 1 year ago (3 children)

Your Thingiverse only has two over year old designs? How serious are you?

Yea, I am net positive with my 3d printing, that includes buying another printer. You have to remember that the raw material the 3d printers use is relatively cheap. I can print off something that costs me less than $1 per part, not including labor, electricity, etc, and still charge multiple times what it cost me to make. #d printing is basically a money making machine if you find the right niche and are decent at design.

[–] lando55 4 points 1 year ago

Haha yep! There are actually several iterations on those models that have not yet been uploaded, as well as some commissioned work that I keep on a private share.

If I can make enough to offset the cost of my time and materials, I'm more than happy.

load more comments (2 replies)
load more comments
view more: next ›