this post was submitted on 27 Dec 2023
604 points (97.6% liked)

196

16601 readers
3933 users here now

Be sure to follow the rule before you head out.

Rule: You must post before you leave.

^other^ ^rules^

founded 1 year ago
MODERATORS
 
top 24 comments
sorted by: hot top controversial new old
[–] [email protected] 69 points 11 months ago (3 children)
[–] [email protected] 25 points 11 months ago (1 children)

Do you have a version of this with a bit less jpeg by any chance

[–] mihnt 45 points 11 months ago* (last edited 11 months ago) (1 children)

1220x833

This is the best I could find. Looks like op grabbed their copy from reddit. Had to go off the beaten path to find a clearer one.

[–] [email protected] 6 points 11 months ago

🥰 ❤️

[–] 9point6 8 points 11 months ago (1 children)

It still cracks me up that guitar people call filters "wah"

[–] [email protected] 12 points 11 months ago (1 children)

Wah is the movement of a narrow band pass filter in a rather limited range, often done using a somewhat expressive timing.

It's not normally used as a static filter.

[–] Buffaloaf 3 points 11 months ago (1 children)

You never used a half-cocked wah? That's a static filter

[–] Theharpyeagle 1 points 11 months ago (1 children)

Complete layman already confused, what's the difference between a static and pass filter?

[–] Buffaloaf 3 points 11 months ago

A dynamic filter will keep changing while a static filter stays at one cutoff frequency. Passive vs active filters are a different situation. Passive filters are just straight forward low/high/band pass filters that don't need a power supply. Active filters use transistors or op amps to boost or attenuate certain frequencies and do require a separate power supply.

So the tone knob on a guitar is a passive static filter. It can be adjusted, but usually it stays in one position once you get it in the right spot. The EQ on certain pedals are active static filters. Wah pedals are usually active dynamic filters, they're constantly changing while you play and also use powered circuitry to achieve the filtering effect.

An old technique is to set the wah pedal as "half cocked", where you set it to a specific spot that you like and then leave it there.

[–] [email protected] 3 points 11 months ago

Where's the "running a maxed out HM-2 pedal into a Peavey solid state amp"?

[–] BluesF 29 points 11 months ago (1 children)

I'm drifting from guitar to synth and the language is even more niche and stupid lmao.

[–] [email protected] 4 points 11 months ago

Please provide citations ✍️ 🤔

[–] somethingsnappy 22 points 11 months ago (1 children)

This frankles me as guitarist of 40 years. I've never played electric so I'm kdomfed.

[–] [email protected] 1 points 11 months ago

I've played both electric and acoustic (and bass and banjo) for 35+ years and none of this makes any sense to me either. I suspect it may be an age issue.

[–] [email protected] 20 points 11 months ago

Overmystification of guitar tone brought us people that think tone doesn't actually matter...

[–] RIP_Cheems 12 points 11 months ago (1 children)

You sound like a mechanical keyboard enthusiasts.

[–] diykeyboards 4 points 11 months ago (1 children)

You take that back!

Thock and bonkle are totally different.

[–] RIP_Cheems 2 points 11 months ago
[–] [email protected] 9 points 11 months ago (1 children)
[–] [email protected] 2 points 11 months ago

That really demystifies a lot of black metal for me. I guess probably because I can actually hear what's going on.

[–] VubDapple 7 points 11 months ago

Totally brillig!

[–] [email protected] 3 points 11 months ago

Wait until you speak to a bass aficionado.

[–] [email protected] 2 points 11 months ago

I'm thirsty, I need wahwah

[–] [email protected] 1 points 11 months ago

It stopped being fun when it stopped being analogue