this post was submitted on 11 Dec 2023
329 points (98.5% liked)

3DPrinting

15596 readers
33 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
j4k3
andypiper
henry_rowengartner
[email protected]
329
I was able to completely migrate from Fusion 360 To FreeCAD (lemmy.world)
submitted 11 months ago by the16bitgamer to c/3dprinting
50 comments fedilink hide all child comments
 

Wanted to share this since this was a long Project. Since Autodesk started changing Fusions functionality, from limiting active projects, to changing their terms of service. Since I need a CAD tool for my 3D Printable designs, I started migrating to a new cross platform CAD tool. That happened to be FreeCAD.

Learning FreeCAD wasn't easy, but was well worth my time. And after slowly pecking at it for 11 months, I was able to re-build every design I made (that I cared about).

I've made my 3D Printable designs available on my GitHub if you are interested: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns

top 50 comments
sorted by: hot top controversial new old
[–] half_built_pyramids 39 points 11 months ago (2 children)

I love them idea of free CAD, but it is so hard to do basic stuff. F360 knows when you click inspect and a circle or something then you're trying to get a diameter. Fc, was always like, oh you wanted the distance between these arbitrary pixels? That's 13.00007654 mm

[–] mvirts 12 points 11 months ago

B b b bug report time!

[–] [email protected] 2 points 11 months ago

Selection in freecad sketches is really bad. Box select with dragging the mouse doesn't work, you can't mask elements (make only points or only curves selectable), selections are added to the current selection instead of replacing it even if you aren't holding shift, and if you miss and click on the backgeound accidentally it unselects everything. And selections aren't part of history so if you spend five minutes selecting a lot of specific elements and then misclick once, welp do it all over again, no undo for you.

There are a few tool buttons like "selected constraints related to the currently selected element" which are really helpful though.

[–] [email protected] 28 points 11 months ago* (last edited 11 months ago) (1 children)

When I first started working with 3d modelling (for 3d printed parts), I followed everyone's advice and got a trial of Fusion. Luckily, I didn't use it much and when I came back to it, my trial was over. I did not want to use a hobbyist license, just to have things change - so went looking for FOSS alternatives. OpenScad made my brain hurt, but then I found FreeCAD. Definately hard to learn, and for someone new to CAD design - I am learning very slowly.

I watched a ton of videos, but still struggle. My saving grace was that I found the official discord. The users on the discord server can be super helpful with learing the nuance of the platform. Several times I posted a file and askded for help and had an answer within an hour. In fact, I just submitted a screenshot of my sketch with dimensions and someone went ot the trouble of recreating it and fixing my problem...so I recommend you join the server if you are struggling. Link below:

https://discord.gg/uh85ZRNcfk

[–] Dkarma 2 points 11 months ago

I taught myself freecad several years ago before discord took off and the curve is pretty steep I agree. Some things aren't intuitive and version differences can be frustrating when watching videos.

[–] TheYang 18 points 11 months ago* (last edited 11 months ago) (2 children)

Have you tried realthunders freecad fork?
I've recently been told that it would be vastly better than upstream due to massive fixes in the hierarchy/timeline, making changes much more likely to work.

I haven't tested it though, so no Idea if it's actually true. https://github.com/realthunder/FreeCAD/releases

/e: FreeCAD upstream is tackling the topological naming Problem as well though!
https://github.com/orgs/FreeCAD/projects/2/views/1
It will just still take some time.

[–] the16bitgamer 6 points 11 months ago

Nope, just vanilla FreeCAD. Been having an issue with FreeCAD on Windows and the GUI flickering like mad when I hover over new elements. If the next update doesn't fix it, I might look into it.

[–] [email protected] 3 points 11 months ago

I was going to type the same. Since OP started learning about 11 months ago, I wonder if he has explored on the realthunder version of freecad or not ?

[–] [email protected] 16 points 11 months ago (1 children)

I did the same thing over the past 6 or so months ago. There's nothing I could do in Fusion360 that I couldn't do in FreeCAD. People love to complain about FreeCAD, and it does have a steep learning curve, but once you learn to design in the way FreeCAD wants you to, it goes quite smoothly.

[–] TheEighthDoctor 9 points 11 months ago (1 children)

I'm barely able to design in Fusion I'm afraid I would be overwhelmed with free cad, on the other hand, I didn't invest that much time in F360 so it's less of a waste if I change.

[–] [email protected] 2 points 11 months ago

I started sorg freecad and yes, i have had my struggles with it but i havent felt like i missed out. My advice is to give it a go

[–] [email protected] 12 points 11 months ago (1 children)

That is awesome! Now you never have to worry about someone taking your cad program away from you.

[–] the16bitgamer 11 points 11 months ago

Yeah... Totally not because the constant logins to autodesk was getting on my nerves. Heh heh heh

[–] [email protected] 9 points 11 months ago* (last edited 11 months ago) (3 children)

Nicely done! I'm still in the "slowly pecking at it for 11 months" stage, but in my case its closer to 24 months now. My biggest problem is that FreeCAD still feels like work and Fusion360 feels like something I can just eff-around with and still get good parts out of.

I've been thinking about trying out CAD Sketcher for Blender except that I'm not really proficient in Blender either.

[–] the16bitgamer 5 points 11 months ago

While I agree you can mess with fusion more, I found my old designs to be flawed and filled with issues.

[–] [email protected] 2 points 11 months ago (3 children)

If you don't mind dropping a small amount of coin, Solidworks has a new maker version that is full fledged Solidworks for under $100 a year. Small price for the gold standard in my opinion. I think FreeCAD is better then CAD sketcher for blender. Much higher learning curve.

[–] [email protected] 6 points 11 months ago (1 children)

Lack of Linux or BSD support is a dealbreaker for me.

[–] [email protected] 1 points 11 months ago (1 children)

Yeah that does suck, I'm stuck with windows for work anyways so that's not a big deal to me

[–] [email protected] 1 points 11 months ago

I haven't had a Windows install at home or work that I've "owned" for over a decade so, it's a lot more of an inconvenience to me, to be fair. I don't want to re-learn an OS that I spent so much effort removing from the realm of "my problem".

[–] [email protected] 4 points 11 months ago

Orrrrrrr... You know.. Keep using FreeCAD, supporting the need for FOSS solutions since it seems to be working well and won't have the price hike that will eventually come with all commercial products.

[–] [email protected] 1 points 11 months ago (2 children)

I hadn't heard that, thanks! An annual $100 is well within what I'm willing to pay for my hobbyist use.

[–] [email protected] 2 points 11 months ago

Yeah it's totally worth it, don't get me wrong, I like FreeCAD but it does have it's limitations. The solidworks license comes with their sculpting tool as well.

[–] [email protected] 0 points 11 months ago (2 children)

I don't want to be this guy, but if you are willing to fork that much, perhaps you could consider donating some to FreeCAD? See it as an investment: in the end you would get a better version of a software that you truly own 🙂

[–] [email protected] 5 points 11 months ago* (last edited 11 months ago) (1 children)

I don't really like what's been built so far and I'm not qualified to contribute, so it's entirely possible the more it's developed the more I'll come to dislike using it. I don't want to own freecad (yet).

[–] [email protected] 2 points 11 months ago

Totally fair and fine :) Having kept an eye on the project for several years already, I think it's heading in the right direction (and no alternative has emerged), but yeah, the road ahead is very long!

[–] [email protected] 4 points 11 months ago

If they had a fund set up solely dedicated to a complete UI rework, with input from UX designers, I'd consider donating.

[–] [email protected] 2 points 11 months ago (1 children)

How much do you use it? For me, once I dedicated a bit of time to YouTube tutorials and realized most of what I wanted to make could be done with booleans, it started getting fun.

[–] [email protected] 2 points 11 months ago

A few projects, but not enough to learn all the differences. And not enough to change my mindset toward sketches. I usually draw compound sketches that aren't valid in FreeCAD and I tend to realize that too late. CAD is kind of a zone-out hobby for me, my brain often isn't fully engaged.

[–] [email protected] 7 points 11 months ago (3 children)

I'm just contemplating the exact same move myself. Any tips or traps for new players? Any particular tutorials you found better than others?

[–] the16bitgamer 8 points 11 months ago

Sketches need to be whole, as in if you have. 2 boxes intercepting the sketch will be invalid.

[–] TheYang 6 points 11 months ago (1 children)

Learn how their parametric references. On the one hand it's a bit annoying when you can't click something to use as a reference.
On the other hand being able to use any length as a reference is really nice.

Named dimensions can be referenced for example by: Constraints.MainStrutLength*1.25+20mm Or a pad dimension with Pad017.Length2 (from memory) Or a dimension in a sketch in a pad:
Pad018.Sketch018.Constraints.SecondaryStrutLength4

[–] [email protected] 1 points 11 months ago (2 children)

it's a bit annoying when you can't click something to use as a reference.

You mean, that? https://youtu.be/x7_KgeLOcKY?feature=shared

[–] TheYang 1 points 11 months ago (2 children)

You mean, that? https://youtu.be/x7_KgeLOcKY?feature=shared

No, I meant even easier, In a single (more complex) sketch, I can't just reference another dimension by clicking on it (as far as I know at least)

[–] [email protected] 1 points 11 months ago (1 children)

Oh, I think I understand. I generally select a bunch of things and use https://wiki.freecad.org/Sketcher_ConstrainEqual and never thought of selecting the dimensions directly. That sounds like a good idea/convenience indeed :)

[–] TheYang 1 points 11 months ago (1 children)

yeah that works, but if you want a+20mm or a*1.5 etc, doesn't work so well.

[–] [email protected] 1 points 11 months ago (1 children)

Yup, absolutely, it's a good idea. Did you think of creating a feature request on their bug tracker? https://github.com/FreeCAD/FreeCAD/issues

[–] TheYang 1 points 11 months ago

No, I'm not even sure that this feature doesn't currently exist

[–] [email protected] 0 points 11 months ago

Here is an alternative Piped link(s):

https://piped.video/x7_KgeLOcKY?feature=shared

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.

[–] [email protected] 0 points 11 months ago

Here is an alternative Piped link(s):

https://piped.video/x7_KgeLOcKY?feature=shared

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.

[–] [email protected] 3 points 11 months ago

I've found MangoJellys YouTube videos to be fantastic whenever I get stuck in FreeCAD. Worth following for random things that's over learned from his videos as well, such as some of the tutorials.

[–] callcc 4 points 11 months ago (1 children)

You rock! I love the dedication you have to actually rebuild all your models.

[–] the16bitgamer 1 points 11 months ago

Outside of the Stylus the rest weren't difficult. Tedious, but simple.

[–] RememberTheApollo_ 3 points 11 months ago (1 children)

How is FreeCAD’s toolset compared to Sketchup? I have long been irritated with F360’s tools because it really wouldn’t let me do super simple things very simply that sketchup, or even Blender does easily. Wasn’t worth putting up with the hassle of basic functionality just to take advantage of the limited more advanced functions IMO. Been giving FreeCAD the side eye and not sure if I want to torture myself with sorting it out.

[–] the16bitgamer 6 points 11 months ago (1 children)

I haven't used Google Sketchup since 2017/2018 so take this with a grain of salt.

Sketchup is a simple to use, and a very beginner friendly CAD program, with crippling limited capabilities for my needs. I moved to Fusion 360 around 2017/2018 since I wasn't able to make the shapes I wanted to. Chamfers, Fillets, and referencing previous parts for current designs.

If you are making simple shapes Sketchup is good, like boxes and circles... I feel it's a step up from what I've seen of TinkerCAD. But I feel a better comparison for FreeCAD is with Fusion 360.

For what tools I need with designing 3D Printable parts, FreeCAD is comparable with Fusion 360. It's just missing some Quality of Life features, like Chamfers that go beyond the edge and cut into a part, or text that can warp to a cylinder or exist between points A & B. There are some plugins that help and do work, but not to the same extent that Fusion does.

With that said play with the tool enough and you will find workarounds and alternatives that might even make your models better.

[–] RememberTheApollo_ 3 points 11 months ago* (last edited 11 months ago)

Thank you. Exactly the kind of comment I was looking for. You are exactly right about sketchup, way too many limitations.

Edit: went with Solidworks. Tried out FreeCAD and just couldn’t wrap my head around it, the workflow seemed too disjointed. For some reason Soldiworks clicked right away despite my dislike of F360’s system and the similarities between the two. Yeah, not free, but for a few bucks a month for the Maker subscription I couldn’t argue. None of Autodesk’s constant fuckery with license agreements and feature reductions.

[–] [email protected] 2 points 11 months ago

Star #2.

[–] [email protected] 2 points 11 months ago

Been learning FreeCAD myself, recently switched to RealThunder's Link branch. It's not the easiest to learn, but I haven't come across any major limitations either. It's really nice to have software where you can do what you want and know you have full control over your documents.

I should never have to carefully read a EULA to know what I can and can't do with my own designs, or whether or not other people can access my designs without permission.

[–] kizzard 1 points 11 months ago

Dude, awesome post! In the last couple of weeks I too have switched to FreeCAD. The real turning point for me was finding RealThunder's fork which is infinitely more usable than the main fork due to stable geometry. At first I wasn't so sure I could hack it, but in recent days I've been getting really comfortable. I haven't opened Fusion in weeks for anything but to grab measurements from my old designs! Cheers.

[–] [email protected] 1 points 10 months ago

FreeCAD is amazing. I never tried any of the "professional" CAD packages but all of the accounts, subscriptions and cloud bullshit makes me never want to either.

[–] [email protected] -4 points 11 months ago

New Lemmy Post: I was able to completely migrate from Fusion 360 To FreeCAD (https://lemmy.world/post/9444979)
Tagging: #3dprinting

(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)

I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md