this post was submitted on 08 Jul 2024
92 points (91.8% liked)

LEGO

3795 readers
1 users here now

Show off your Lego, discuss your MOC's and builds, and talk news and upcoming sets here!

Rules

1 No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia.

2 Be respectful, especially when disagreeing. Everyone should feel welcome here.

3 No porn.

4 No Ads / Spamming.

founded 1 year ago
MODERATORS
 

It seems these bricks were made in the late 1970s without Lego's authorization, by rogue employees developing new types of plastic and experimenting with their molds and various plastic colors.

It is unknown just how many of these bricks were made, but they are extremely valuable, and in my opinion and many others, very beautiful.

top 14 comments
sorted by: hot top controversial new old
[–] Squorlple 23 points 4 months ago* (last edited 4 months ago) (1 children)

While some pieces of SpitBrix’s videos are accurate and interesting, he does often embellish for his viewers. The thesis of this video relies on these two points that SpitBrix makes:

  1. In Lego’s standard manufacturing process, standard manufacturing marbled scrap [I’m abbreviating this to SMMS from now on] are “error bricks and manufacturing waste” and must be destroyed.

  2. Grangemouth bricks were made beyond the permits of standard manufacturing, and they also look similar to SMMS

Ergo, Lego is actively seeking and destroying the Grangemouth bricks and hates them with a passion?

This conclusion seems tenuous and dubious to me. While both points on their own are true, there seems to be a leap in logic that SpitBrix doesn’t back up. He creates a potentially false equivalency between Grangemouth bricks and SMMS. I think this error is best underlined by his line at 4:36 “And if Lego is so keen to keep these particular bricks out of the public’s hands, then where did all of these colorful samples come from?”, with “these particular bricks” referring to SMMS, and “these colorful samples” referring to Grangemouth bricks; SpitBrix contends that SMMS and Grangemouth are categorically the same according to Lego, but he doesn’t explain why that must be. While the pieces themselves may look similar, the differing circumstances of their creations may distinguish them in the eyes of The Lego Company.

SpitBrix provides no examples of Lego expressing a desire or action to specifically destroy the Grangemouth bricks (in contrast to SMMS), nor does he provide any examples of Lego internally or externally expressing ire for the public having the Grangemouth bricks (in contrast to just the misuse of their mold and production rights). In fact, the two examples he gives of Lego expressing thoughts on the bricks themselves were each positive or plausibly positive: @8:30 with Lego possibly approving the release of the Grangemouth bricks into the public, and @10:20 with Lego finding the Grangemouth bricks to be a lighthearted subject to make an April Fool’s Day joke about them.

The information presented in the video seems to mildly suggest the opposite of the thesis itself. While the conclusion could still plausibly be correct, the lack of solid evidence makes it seem spurious. In a pinned comment on the video, SpitBrix says “An extensive amount of time went into researching, scripting, and editing this mini-documentary.” If he could provide any sources that have proof of his claim itself, or if anybody else can find any other source to verify it, that would be immensely helpful.

[–] buffaloboobs 4 points 4 months ago

well said. I can't remember the title, but I watched a documentary on the Lego company a few years ago. iirc, at one point, when they were showing some of the manufacturing process, they showed a fucked up brick, and how they try to destroy anything like that, because people act like they're stupid-valuable, so they try to stop that stuff from getting to the public (as I understood it) almost as a way protect idiots from themselves. I get it.

[–] [email protected] 21 points 4 months ago (1 children)

Damn, now I kinda want some.

[–] over_clox 20 points 4 months ago (4 children)

They said they're going for upwards of $500 a brick, so 20 of them might set you back $10,000...

Good luck though, if you get even one, make sure to post it for everyone to see.

[–] [email protected] 5 points 4 months ago (1 children)

Making your own would be much cheaper. Custom silicone mold?

[–] pennomi 15 points 4 months ago (1 children)

Good luck getting the right tolerances using silicone.

[–] [email protected] 6 points 4 months ago (1 children)

Injection molding in steel molds is the way to go. It can be done at home, but only by the most serious of hobbyists. (Hell, I could probably make an aluminum mold or two, now that I think about it. At $500 a pop, it could be worth the time...)

[–] [email protected] 5 points 4 months ago (1 children)

The lego tolerances are so tight you would not get it accurate by a hobbyist, many mould makers have struggled with how tight the tolerances have to be. You even have to account for ambient tenoerature when cutting the steel in case your nold has expanded from cutting heat and environment temperature as well as typical cutter wear and deflection, and then there is the polishing aspect

[–] [email protected] 5 points 4 months ago* (last edited 4 months ago)

What I was able to find is that bricks need to be within 10 microns and that is so they can reliably fit with Legos made over the last 50 years, or something like that.

Also, the shrinkage of the ABS is probably what would drive me crazy. The shots of plastic would need to be super consistent in a mold that was specifically designed with the properties of the plastic in mind.

Since I have never done injection molding or even cut molds, it would be a cool project to attempt, just for lulz.

(There are other ways to get the desired result that would be good enough to make the sale, but I won't get into that.)

[–] [email protected] 5 points 4 months ago

As much as I would like one, at that price I would get 10020 Santa Fe Super Chief

[–] SkyezOpen 3 points 4 months ago

I've spent time on the high end MTG Facebook page. I've also glanced at the price tags on wh40k starter sets. Those numbers mean nothing to hardcore hobbyists.

[–] [email protected] 2 points 4 months ago* (last edited 4 months ago)

Unlikely. But they are both neat to look at and posessing of an interesting history.

Makes you wish you could hold some.

[–] [email protected] 10 points 4 months ago* (last edited 4 months ago)

Wouldn't lego be best just mass producing a batch, selling em, essentially devaluing the originals by a large degree?

Edit: Watched the video, turns out they simply could just... Stop discarding them 🤣

[–] [email protected] 3 points 4 months ago

Wow, that's an interesting tidbit of history I was unaware of.