3DPrinting

15752 readers

126 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

[Solved: wet filament] Help me identify the problem: wet filament, bad z-height, or clogged nozzle? (self.3dprinting)

submitted 11 months ago* (last edited 11 months ago) by PlutoniumAcid to c/3dprinting

18 comments fedilink hide all child comments

This is a Prusa MINI+ that has worked flawlessly for 3 months. Suddenly the prints won't stick to the bed, the first layer is all messy and I cancel the print before anything worse happens.

The printer has auto bed leveling so I would rule that out.
The plate is cleaned with 70% IPA, so it's not dirty either.
I have tried to adjust the "Live Z Adjust" while printing that first layer, but no setting works well.
Each filament is printed at recommended temps (+/- 215C) and bed is at 60C.
Out of my 5 spools, only 1 works well: RepRapper 3-color PLA. Even the Prusament PLA fails to stick well, and also eSun PLA+, and eSun matte PLA, and Tinmorry TPU.

https://i.imgur.com/MEpK37W.png

Update:

Thank you all for your kind input.
I washed the plate, and cleaned the nozzle (have no spare nozzle).
I also did a fresh Z-test (with this object) using Prusament galaxy silver PLA.
That was successful and showed that my height was already very close to perfect.
Z-test result shows that -1.425 is best. I was off by only 0.025. Image
Started printing an object with eSun matte black PLA but the result was same as in my original photo.
Changed back to the Prusament galaxy silver PLA and the result is perfect. (image)

So it looks like my filament storage is not up to snuff! Good thing that I only have a few spools, so not much is lost.

you are viewing a single comment's thread
view the rest of the comments

[–] IMALlama 2 points 11 months ago (1 children)

A follow up to your edit: there are multiple methods to dry your filament. Even if you bought an appliance, the cost of doing so is probably less than buying new spools and you could use it in the future.

[–] PlutoniumAcid 2 points 11 months ago

I agree. First I used vacuum sealed bags (one per spool) with dessicant, now I use a big plastic tub with 1kg of dessicant. It seems to help, but slowly. I might buy one of those Sunlu drying devices for 2 spools at a time.