3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
If you mean electroluminescent like EL wire, this can't be printed. It is a copper wire coated with phosphorus and then wrapped in clear plastic.
Edit I found some information on DIY electroluminescent paint, so you could maybe coat a 3D printed object (with a fair amount of work and money):
Thanks, i hoped there was a filament that could do that without extra steps. Maybe in the future
You won't see it in your lifetime.
The closest you can get is glow in the dark filament.
Or UV filament with a UV light
Depending on what you're trying to do, you can get EL panels and EL tape which can be cut to custom size & shape, and the part connected to the wire will still work (even with holes punched through it).
It's also possible to make EL paint and coat surfaces with it, though definitely an involved process and not cheap. Lumilor sells EL paint kits which were used in this youtube video to coat various surfaces. This article from Hackaday specifically mentions painting 3D printer objects, but I didn't see any examples.
Here's a project that used conductive filament as a base for an EL surface
Here is an alternative Piped link(s): https://piped.video/watch?v=eUUupR-ongs
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source, check me out at GitHub.