this post was submitted on 30 Dec 2024
6 points (87.5% liked)

3DPrinting

15832 readers
96 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
 

So my dad broke the septic clean out cap with the lawn mower. He cannot find a replacement that is lower to the ground so I am printing a new one. Should I use PETG? Or another material. Also I hope this is not violating some form of regulation in the U.S.

you are viewing a single comment's thread
view the rest of the comments
[–] dual_sport_dork 2 points 3 days ago* (last edited 3 days ago) (1 children)

Plugging a device into an outlet (be it a refrigerator, phone charger, or even an EV charge cord) does not require a permit.

Want to bet? In my county, it is technically a requirement to pull a permit and get permission from the county government to install a window air conditioner. You know, the kind you slam the window shut on and plug into an outlet as the sum total of its "installation?" And you're going to remove again in the fall? (Removal requires another permit.) Obviously the compliance rate with this is zero, but it legally gives them something to harass just about anyone over any time they feel like it.

Never underestimate the insanity of the petty egos who have small amounts of authority.

[–] spongebue 0 points 2 days ago (1 children)

I would bet a small amount of money that's related to the mounting of a heavy piece of equipment halfway outside creating a potential hazard.

It also contributes to my original point that regulations are not just for contractors. I get that not everything is followed to the letter (kinda like my speed limit analogy) but to imply that homeowners can do anything they want with their property and supporting that claim with benign things that don't have safety requirements is laughably wrong (in most civilized areas of the US at least - admittedly there will be exceptions when this is generally handled at the municipal/county level)

[–] dual_sport_dork 2 points 2 days ago

No, it's because the county decided that "all installation and removals of HVAC, air handling, heating, and cooling equipment" require a permit and did not stop to think initially that this is worded in such an overbroad manner that it also technically encompasses window and portable air conditioners, and theoretically also portable space heaters as well. All means all. It's just that window AC is the only thing visible from the outside of your home, so the inspectors can bust your balls for it from the street if they feel like hassling you for something.

I'm sure the local government loves it as well because if a "violation" is noticed from the street it gives them a legal avenue to enter the properties of people they don't like (i.e. poor people, blacks, hispanics, etc.) to troll for additional citations or other generalized harassment.