3DPrinting

15665 readers

64 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

New to 3d printing, my ender 3 is having problems with thermal runaway and doesn't seem to be able to keep a consistent temperature when I begin printing. (lemmy.world)

submitted 1 year ago by Sol33t303 to c/3dprinting

15 comments fedilink hide all child comments

It however does not have issues maintaining the temperature when it's not actually printing. I can set my hotend to 215 before beggining my print and it's happy to sit there.

Other problems with it include under extrusion and extruder skipping, as it seems to have troubles pushing the filament out.

What does this sound like it could be? Does it sound like a blockage? Could a blockage cause temperature issues? I have already tried turning off the part cooling fan as I had a similar issue with that a while back but that has no made a difference it seems.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 5 points 1 year ago* (last edited 1 year ago)

Check the entire thermistor cable as well as the plug connections for tightness. Preheat the hotend and then wiggle/bend the cable 1 inch at a time all the way back to the main board plug checking to ensure the recorded temp remains constant. (You can also do this with an accurate multimeter checking resistance across the unplugged thermistor if you don't want the printer on while poking around.)

Those aggressive jumps sure look like a thermistor problem, but only when printing in motion, which screams bad cable/connection. Manufacturing errors happen.