Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either [email protected] or [email protected].
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email [email protected]. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try [email protected] or [email protected]
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
view the rest of the comments
How does the transmission function without a clutch?
They have a clutch, but once you're moving it is possible to shift a manual transmission without using the clutch. What you need to do is first take off the load currently passing through the box (if power is being transmitted either direction it holds the engagement dogs in place), so if accelerating you quickly let off the throttle and if decelerating you quickly tap the throttle. This lets you move into neutral, once in neutral you increase or decrease the engine revs to near (ideally exactly) what they would be in the gear you want to shift into at your current road speed, and holding those revs you can then shift smoothly into the new gear.
It is not something I would recommend unless in a jam with synchromesh transmissions (e.g. regular cars, light trucks) as most people aren't going to get it exactly right every time and will just burn out the synchros. If you're unfamiliar with the term these are the parts of the transmission that let you shift from one gear to another in one motion without having to stop in neutral, let the clutch out, and increase/decrease the engine revs to suit your desired gear before clutching in and shifting into it.
Clutchless shifting can and does work well in non-synchro transmissions (e.g. motorbikes, many heavy trucks) once you get the knack, as these transmissions are both more forgiving of not being exactly rev matched and will provide a strong auditory signal if you don't get it close enough (i.e. you'll know if you got it right or not so won't half arse it). Many motorbikes now actually automate this process with devices known as quickshifters - named so because even when doing it by hand clutchless shifts on a bike are noticeably faster than using the clutch.
It's doable in most (maybe all?) manual vehicles. If you get the RPMs to a certain point, you're able to shift smoothly to the next gear without pushing the clutch in.
It's no fun though. I had an old tracker that the clutch cable broke on. It was my only vehicle and it took a couple weeks for the replacement to come in. Switching between gears was okay once I got the hang of matching RPM. Starting, however, required me to turn the engine off at every stop, putting it in first, then letting the starter pull the car along a few feet until the engine was turning fast enough to run. It was a miracle I didn't burn the starter up. Thank god I lived in a pretty rural area and only had a few stops between home and work.
Overall, I'd rate driving manual without a clutch 1/10.
They're two separate things. That's the idea, a clutch is a disconnect between the engine and transmission.
A really good driver only uses the clutch to start and stop.
Anyway, another of my comments got removed without explanation, I'll just see myself out of this misinfo echo chamber that can't understand why people don't post here.
I had great hopes for the fediverse idea, but the same human greed issues, like mastodon selling iut to Meta, and zealous moderation, like whatever happened to my comment and another one before that complaing about the Mudrocks and Musk.
Bon chance, fedi.