Most amps expect line-level audio anyway, so you should be fine. I'm surprised the already amplified "headphone out" into the amp didn't sound horrible.
this post was submitted on 29 Nov 2024
15 points (94.1% liked)
Ask Lemmy
27210 readers
2100 users here now
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either [email protected] or [email protected].
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email [email protected]. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try [email protected] or [email protected]
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
founded 2 years ago
MODERATORS
It has been great, I have just run the amp on a low volume.
And I just realized that I have a record player with a line out that I can test it with.
Sorry, I forgot to thank you for putting me at ease.
Have a great weekend!
I just got my new monitor installed, and you were quite right, it just worked fine, thank you!
Good deal!
It will be fine. I have a weird daisy-chain of devices hooked up to my monitors so that my personal computer, work computer, and Nintendo switch are all capable of running through my speakers (and monitors).
As far as I understand, “Line” output signals are usually un-amplified, so that is likely better for plugging into an amplifier than a “headphone” output—but honestly, a computer monitor is not a purpose-built audio device, so its likely just a standard 1/8 inch phono jack amplified audio output regardless of labelling, amplified by both the computer running it and the monitor itself.
This is not digital data you’re working with but a literal fluctuation with electrical energy to mimic a sound wave-form so anything with a phono plug is compatible with anything else—it’s pretty simple technology.
The worst case scenario (assuming this stuff is all properly made) is a buzz coming from the amp when no other sound should be heard.
I am also curious about the broken front panel head phone jack and failure of the rear panel audio out.
In the case of the front panel, is it physically damaged so it no longer works or did it just stop working after the computer toppled. If it’s the latter, you may wanna open up the case and see if your front panel connectors on the motherboard came undone (you’ll need to consult your motherboard diagram to find where those are but since you said you built the computer I assume you know that).
As for the rear panel—standard check for driver updates or system sound settings being incorrectly prioritized. I have an asus motherboard that I selected specifically for optical audio output because I didn’t want electrical interference from a simple phono plug (and I was being precious at the time) but the optical output will occasionally stop working and I’ve never been able to fix the issue—likely just a software glitch because a restart usually fixes the issue. I now have my Klipsch powered speakers connected both via optical out and USB as a backup, which brings me to my final piece of advice:
If all else fails, just get a USB Digital Audio Converter and use that as your system sound output if you want to continue using your amp and speaker setup, OR, just get a pair of actual computer speakers with USB connection—dealer’s choice.
Right, I just got my new monitor installed and it worked fine right out of the box!
Thank you for your advice
Glad it worked! Happy computering.
Thank you for the very detailed answer, the headphone jack in the front had it's connector rings ripped out buy the cord that was connected at the time of the topple.
The rear audio out just stopped working when I got it a nicer cable, the cable I tried to give it was a normal but better quallity 3,5mm -> RCA cable which worked fine in my old computer even after it stopped working on my current clmputer.
I have a Gigabyte B550 motherboard with a Ryzen 5600x and 32GB ram.
Currently I use Displayport to carry the signal from my computer to my monitor and my monitor acts as a DAC.
Long term planning is to get a micro Hi-Fi unit from Denon and use TOSlink from my motherboard to get the signal to the Denon unit and power my speakers from that.
EDIT, forgot this part:
I have also thought about getting an Audioquest Dragonfly DAC, in general I dislike getting new USB devices ever since Logitech broke my trust and installed an unwanted program through Windows Update just by having a mouse connected.
If you're feeling adventurous, you could cut your front panel audio wires and connect them to a new 3.5mm jack inside the case. It might be a lil janky but it would get the job done for <$10
AudioQuest Dragonfly wouldn't be a bad way to go. I have a Red on my PC because the onboard mobo audio picks up USB noise. I've also got a Cobalt for my phone/headphones. They have a firmware update utility for the Red/Black that you manually install and can uninstall afterwards, the Cobalt ships with current FW and hasn't been updated yet. That said, they're pretty expensive for what they are and I got both of mine 50+% off. If you're considering a "proper" audio setup, I'd go straight to to the Denon unit you're looking at
I just realized that I have a record player with a line level output I can test with....
If your video card supports HDMI, the audio should be carried over that. HDMI is video+audio.
Source: My PC uses HDMI to connect to an 8K television.
Oh I use Displayport to run the audio to my monitor, it has worked great.