3DPrinting

15752 readers

161 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

PrusaSlicer - Need some quick help with prototype printing (self.3dprinting)

submitted 10 months ago by ArtVandelay to c/3dprinting

13 comments fedilink hide all child comments

Hi everyone - I'm doing some prototyping on a part I'm designing. The final part will take up nearly the entire build plate, but for a test print, I'm using a negative modifier to remove 80% of the part, leaving only a sliver to print. The problem is that once sliced, the part left to be printed is way over on the edge of the build plate, and I'd rather it be in the center if possible. If I position it where the edge i want printed is in the middle, it of course complains that part of the file is off the build plate and won't let me slice, even though it's all being removed with the negative modifier. Any ideas on how to get it to cut the piece and still center it?

you are viewing a single comment's thread
view the rest of the comments

[–] neumast 6 points 10 months ago* (last edited 10 months ago) (1 children)

Sorry I am short of time, but hopefully I can help:

Instead of using negative modifiers, just load the full part as it is. Then rotate it (Usually ±90 degrees) around the x or y axis and use the z cut tool to cut the part in half. Only keep the part you want. Reverse the initial rotation and the object is now cut on one side.

Redo the steps for all 4 sides.

Edit: also this might help (dont know, if it's an beta option): https://help.prusa3d.com/article/cut-tool_1779

[–] ArtVandelay 3 points 9 months ago (1 children)

Thank you the cut tool worked perfectly! I don't know how I missed that

[–] neumast 2 points 9 months ago

Glad i could help!