this post was submitted on 17 Feb 2024
24 points (96.2% liked)

3DPrinting

15656 readers
74 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
j4k3
andypiper
henry_rowengartner
[email protected]
24
How stable is a metallic print (feddit.de)
submitted 9 months ago by [email protected] to c/3dprinting
33 comments fedilink hide all child comments
 

The bottom hinge of my shower cabinet door is broken. Can’t buy a replacement because it’s too old. I think about design it and print in metal. Or to sawing and filling it out of a metallic block.

I‘m not sure how stable a metallic print is. The glass door is quite heavy either around 15 kilos. Do you guys have recommendations?

And do you know a metallic print service in Germany or Europe? I own just a plastic printer

you are viewing a single comment's thread
view the rest of the comments
[–] ForgotAboutDre 3 points 9 months ago (2 children)

Hinges are often made of sheet metal.

This can be cut, drilled and bent to fit. A vice, a drill, a file, a hammer and hacksaw would be enough for most hinges.

If the door remains suspended with just one hinge a plastic one may work for a short while. The hinge only suspended half the load.

You can also print the hinge with a high infill percentage to improve strength and resist deformation.

[–] [email protected] 3 points 9 months ago

I thought this version as well at first. Unfortunately, I found a detail that is sort of cogwheel effect - keeps back the door from swinging and closing. It will be very very hard to get this one drilled with a drill machine.

[–] [email protected] 1 points 8 months ago (1 children)

Hi guys, thx for all your help. My project is finally successful. Shower hinge repaired - entire shower cabinet usable now. Let’s give you a short feedback:

  • I‘ve chosen PCBway as it was the cheapest with 90€ for stainless steel, laser sintering.
  • Other both providers were around 300€ up to 1000€ ( this one in chrome though)
  • The production & delivery time was quite long with 2-3 weeks from China. But I‘m not in a hurry.
  • I did two plastic prototypes first and discovered always a few new details I didn’t recognize first.
  • The metallic print is stainless steel (hope better than Tesla quality) and it‘s fully printed - not the walls only.

At all it costs 130€ for the print, oil, silicone sealant and some other things. Saved me approx 2-4000€ for a new shower cabinet as spare parts were out of production. A picture in comment below.