this post was submitted on 28 Jun 2023
623 points (98.9% liked)
196
16216 readers
2338 users here now
Be sure to follow the rule before you head out.
Rule: You must post before you leave.
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I hate phillips. It seems like their only purpose for existing is to strip out so that you can never remove them.
Personally, any time I have a project, I always opt for torx (star). The screwdriver bits for them are not tapered so they don't push themselves back out of the screw-head (unlike phillips), so they tend to stay in place and grip much better. It's a lot harder to screw up a torx screw or bit than a phillips one.
I. Love. Torx! They just work! Don’t mind the angle, don’t mind the force! They’re just perfect! Never going back. (At least for everything related to woodworking)
They actually were designed to cam out in low torque applications so consumers could not over-tighten them. The problem is now those consumers only know what a phillips is, so they're used for everything.
Hilariously, that "purposeful cam-out" was the manufacturers/patent-holders trying to turn a bug into a feature. https://handwiki.org/wiki/Engineering:Cam_out
Same. I use torx for everything. Also gotta love the square Robertson ones, they're just not common where I live. I hate Philips, although for anyone not aware, there is a difference between posi drive an Philips and going to the effort of making sure you have the correct one massively reduces torquing out and damage to screw head.
IMO, phillips is for electronics and some small applications. Something you're really not putting much pressure on and probably driving by hand and not a power tool.