this post was submitted on 11 Nov 2023
46 points (94.2% liked)

3DPrinting

15770 readers
477 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
46
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/3dprinting
 

IMG_20231111_205431

I cant get my Anycubic Kobra 2 with Klipper to print correct. The first mm of each layer are faulty, resulting in a bad tooth in gears.

I tried to slow down the print, tried to minimize/deactivate retraction, fiddled with z offset and first layer height, lowered bed temp, altered the extrusion rate. Nothing works. Everything else seems fine, slim z seam, nice walls, no over/underextrusion.

Anyone got a hint how i could fix that?

Edit: I cancelled that Print, the Problem is only in the first tooth:

IMG_20231111_212736_745

the tooth in the marking should look like the ones above it.

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 3 points 1 year ago* (last edited 1 year ago) (1 children)

Oh I couldn't even see that tooth at first. I just saw the varying layer width.

That's definitely going to be a slicer or model error. Make sure your input STL doesn't have any missing faces or geometry and that the teeth were generated correctly

[–] [email protected] 3 points 1 year ago

Its a slicer error. With cura it works correct...