3DPrinting

15596 readers

33 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

What is your must have hardware for your finished prints? (Screws, magnets, etc.) (self.3dprinting)

submitted 1 year ago by KroninJ to c/3dprinting

24 comments fedilink hide all child comments

I'm looking to start keeping hardware for prints that need additional parts to complete them. A Pi case that I printed needed screws that I don't have on hand and needed to go searching for some.

It got me thinking to keep a container of stuff ready that would get used often, but I don't really know what to keep on hand. What do you have readily available?

you are viewing a single comment's thread
view the rest of the comments

[–] joemansmoke 12 points 1 year ago (2 children)

I have a pack of M2-M5 screws + nuts + washers thats come in handy. Also, heat press inserts (if you have a soldering iron) can really help clean up designs. Again, I just have a M2-M5 pack with various lengths, and I think it even came with the soldering iron tips for each insert size.

I've had trouble finding Metric fasteners in my local hardware store, so I just buy variety packs online. Also, most 3D prints Ive run into use Metric sizes, with the occasional 6-32 screw here and there.

Zip ties are nice if you mess around with your printer or work on electronics (cable management).

[–] FuglyDuck 3 points 1 year ago

M2, m3 and m5 bolts of various lengths,

The inserts and a tap. For weak connections, instead of the insets, I just tap out the hole.

Other hardware I keep on hand are wiring and soldering, resistors and other vitamins, smooth rods (for making pins, etc).

Mostly I buy what I need as i need it but things like electronics components, they tend to be more less bulk buys.

[–] KroninJ 1 points 1 year ago (2 children)

I wasn't sure about what type of screws to get. I haven't printed off enough that need them to know quite yet, but not having any also has held me back from printing those things.

I was thinking about springs, but it seems like there's just too much variety to really keep much on hand.

[–] [email protected] 2 points 1 year ago (1 children)

With springs, you might be able to substitute a print-in-place option.

Or keep the springs from retractable pens. If you end up with a project that needs one, you might have the right size...

I have also seen some designs that use a rubberband to do something similar.

Just a couple of ideas, that might be useful.

[–] KroninJ 2 points 1 year ago

Thanks for the idea! Will have to pick up an assortment of rubber bands.

I've saved some springs from dead lighters, but I don't know if they will get much use.

[–] [email protected] 2 points 1 year ago (1 children)

@KroninJ @joemansmoke oh and a set of files can be useful as well.
https://www.screwfix.com/p/magnusson-needle-file-set-5-1-2-6-pcs/4474v

[–] KroninJ 1 points 1 year ago

I just picked up a set a few weeks ago. Game changer for sure.