3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
It's not the supports that are the problem, it's the second wall inside. The red walls are the outer walls, and the green ones are the inner walls. There's an outer wall on the inside of the inner walls. Basically the part with the tree support in the middle is considered outside by the slicer. Instead of having a second set of walls plus tree supports, there should just be infill.
Sorry misunderstood the issue. Then as others have said, you'll me need to edit the model. There likely an inside wall which needs to be removed and the leg closed.