3DPrinting

16143 readers

171 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

How Hard did I screw myself by """Cleaning""" the Nozzle at 300°C... Multiple Times...? (lemmy.blahaj.zone)

submitted 15 hours ago* (last edited 12 hours ago) by [email protected] to c/3dprinting

26 comments fedilink hide all child comments

Back in December I got my P1S and since I mostly printed Vases and plant pots back then, I decided to mostly use PETG.

That PETG as I now know was just Wet, which caused it to ooze out of the nozzle after the print, a Fact I hated. Since at the time I must've be pretty stupid, I decided to clean it by Heating the Nozzle to the max of 300°C and let it ooze fully out. It did work and the prints after it where fine... so I did it another 10-20 times until I got a Brass Brush and started just using that...

In retrospective, Filament really shouldn't be heated over its limit... because that probably Backed in the PETG really hard. Mustve been to the point where the nozzle clogged, getting me to cold pull it a lot.

Big question is, is there still Backed in PETG in that nozzle, even after 20 or so Cold Pulls? It definetly seems to underextrude a noticable bit. Should I use the replacement nozzle or look into other reasons for said Underextrusion? Thanks!

Edit: Did as suggested and tried swapping the nozzle, thermistor was stuck and getting it out broke it, replacement thermistor is gonna take till thursday to arrive, god I hate this machine

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 11 hours ago (1 children)

Is there anything fancy about the nozzle or is that just the general grift companies are doing with replacement parts?

[–] myplacedk 1 points 8 hours ago

It is a stainless steel nozzle, but the real problem is that it's not just the nozzle, it's either "hotend" with cooling ribs etc, with lots of fiddling to connect wires etc, or "complete hotend" that also comes with a fan so more of the wires are already connected.

See https://us.store.bambulab.com/products/bambu-hotend-p1-series?variant=40923060797576

I wish they did like Prusa where you can also buy assembly, but they have one that is basically an adapter so you can use any regular cheap nozzle.