3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I do this on my Xtool M1 with both the blade and laser cutter, both seem to work fantastic though the laser cutter leaves a little burnt residue.
Super easy to come up with the trace, just throw your part on a flatbed scanner, scan and trace it out in FreeCAD and send the SVG out for it to cut.
BBK actually doesn't make a 61mm gasket (I believe for 3502 part number), it still has 58mm holes so you're really better off just going custom when it's $20 for the wrong gasket lol that you have to hack up anyways.
I love the reduced time to get things with this approach. I just keep enough of different types of FelPro gasket paper on hand and have them cut as needed, way faster than Amazon!
My friend has been running a Nylon IAC spacer ln his turbo 351W foxbody with two laser cut gaskets to go with it for over a year with hard racing in high temps and all of it has held up great.
Most of the gaskets I've made are for oily things and I'm not sure all would be clean enough and/or fit on my flatbed. That does sound like a very fast/effective method though! Especially if you found yourself needing to do this fairly frequently.
Photographing fairly flat angle with your phone and then scaling the imported image using a dimension such as the diameter of a screw hole or something will get you VERY close as well for more prohibitive items!
3D Scanner is really worth while if you do a lot but that's a bit of a barrier to entry for most people currently but hopefully follows the trend of printers getting better and more affordable.