3DPrinting

15685 readers

198 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

Any recommendations for a low-cost, low-hassle printer? (self.3dprinting)

submitted 1 week ago* (last edited 1 week ago) by CommissarVulpin to c/3dprinting

51 comments fedilink hide all child comments

Several years ago I leapt enthusiastically into the realm of 3D printing by buying a massive, expensive delta-type printer. I had to put it together myself, which was fun, but after that I struggled to get it to print well. Even simply trying to get the prints to stick to the bed were difficult, leading me to add huge brims to all my parts which were a pain to cut off afterward. Eventually I gave up fiddling with it and it’s been gathering dust ever since.

I know that a lot of you treat the hobby as an opportunity for endless tinkering and optimization, which is great, but I think I’ve realized that what I’d prefer is something that just works out of the box with a minimum of adjustment.

you are viewing a single comment's thread
view the rest of the comments

[–] skizzles 2 points 1 week ago

The P1S by Bambu Labs, while not the cheapest (on sale now for 550$ without an ams) pretty much just works.

I've done PLA and PETG (various brands) using default settings and the thing just works. I've also used polycarbonate but that required a small amount of tweaking.

I guess it also depends on what you're trying to print. If you are going to be printing figurines that you will paint, you might be better off getting a resin printer, though I can't speak much to those as I haven't used them, but we do use anycubic at work and I've seen some pretty good looking models come out of them.

I've also heard good things about the A1/A1 mini (also Bambu) from coworkers.

We probably have 30 or so 3D printers at work including a nylon powder 3D printer which is amazing but I'm not sure of the brand, and it's probably expensive because it stands about 4.5 ft tall.