Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Please don't post about US Politics.
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either [email protected] or [email protected].
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email [email protected]. For other questions check our partnered communities list, or use the search function.
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
view the rest of the comments
It won't work, it will try, then inspect the battery for its voltage and other stats via i2c, decide the battery is unsafe, and shut itself off.
I might be wrong, but systems I've worked with do this because they want to make sure the battery won't explode, they have a battery management chip, either on the motherboard or in the battery, and this tells it whether the battery is safe to use or you should shut down, and if it can't communicate it will probably assume it should shut down.
Personally I'd solder a new barrel connector on, or figure out where the dc-dc converter is and either replace it or backfeed.
It may be possible to get past that, I've seen people disassembling the battery to get the BMC and connecting the DC power supply to that instead.
It sounds way more risky than OP's initial idea. I wouldn't recommend taking apart batteries.
Yeah, none of this sounds like a recipe for anything except fire.
I've taken apart laptop batteries. It isn't that hard, but what op wants to make happen seems like a ton of sketch work.
Nah, totally easy and safe if you have a little experience tinkering with stuff like that.
The fact that he came up with the idea in the first place tells me he's halfway there. I think he'll be fine with a little care.
It can be done I'm sure. But it's still a whole lot of work instead of just fixing the issue. He'll have to remove battery, disassemble it to get the control module inside, where his new psu to that so it fools the computer, drill through the case to run his wires and secure it to not be pulled on, and throw it all back together.