3DPrinting

15792 readers

338 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

609

I designed a cardboard cutter that turns boxes into free cat scratchers (lemmy.world)

submitted 3 months ago by Kickass3DPrints to c/3dprinting

97 comments fedilink hide all child comments

Also good for composting and making room in your recycling bin

you are viewing a single comment's thread
view the rest of the comments

[–] Today 3 points 3 months ago (1 children)

Do I need the M5 or can I get away with the m5c? I really know nothing about it or how much material things need. I just want to make cool things. How much filament did your cardboard cutter require?

[–] EvilBit 3 points 3 months ago* (last edited 3 months ago) (1 children)

I’m not the OP but I went ahead and bought his file and sliced* it and with 20% infill, it will require about 77g of filament. So with one normal spool, you could print 12 of them.

I can only vouch directly for the M5, but looking into the differences, it looks like the M5C would be a solid option. I would miss the onboard camera and the ability to check my prints and get notifications of suspicious issues, but the printer itself is more or less the same otherwise.

Edit: and with the current sale, $200 is a STEAL

Slicing is the process where a program takes the 3D model and turns it into layer by layer instructions for the printer and where you configure lots of settings such as infill, which is how much of the interior of the model is printed with a lattice for structural support. Prints are rarely 100% solid material but rather a hull with infill.

[–] Today 3 points 3 months ago (1 children)

I ordered the m5c. I got the printer, 13 lb of material, and some accessories for $339. Can't wait to make some Braille Play-Doh presses.

[–] EvilBit 2 points 3 months ago

Nice! Congrats and I hope you enjoy it!