this post was submitted on 14 Aug 2024

103 points (98.1% liked)

Linux

48555 readers

1442 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

103

why can't I connect to my ssh server UNLESS I enter eval "$(ssh-agent -s)" first? (lemmy.dbzer0.com)

submitted 4 months ago* (last edited 3 months ago) by [email protected] to c/[email protected]

72 comments fedilink hide all child comments

I have my own ssh server (on raspberry pi 5, Ubuntu Server 23) but when I try to connect from my PC using key authentication (having password disabled), I get a blank screen. A blinking cursor.

However, once I enter the command eval "$(ssh-agent -s)" and try ssh again, I successfully login after entering my passphrase. I don't want to issue this command every time. Is that possible?

This does not occur when I have password enabled on the ssh server. Also, ideally, I want to enter my passphrase EVERYTIME I connect to my server, so ideally I don't want it to be stored in cache or something. I want the passphrase to be a lil' password so that other people can't accidentally connect to my server when they use my PC.

top 50 comments

sorted by: hot top controversial new old

[–] INeedMana 45 points 4 months ago (4 children)

The whole point of ssh-agent is to remember your passphrase. If you don't want to do that your problem might be that for some reason ssh client doesn't pick up your key. Try defining it for the host

Also, there's -v flag for ssh. Use it to debug what's going on when it doesn't try to use your key

[–] [email protected] 7 points 4 months ago* (last edited 4 months ago) (1 children)

okay I tried that, using -i to specify private key. I get the same thing: blank / blinking cursor. When I use verbose -v flag, I see that in all cases (using -i, the config file, and originally) it ends with these two lines (after about 50 lines) :

debug1: Offering public key: /home/username/.ssh/id_rsa RSA SHA256:j3MUkYzhTrjC6PHkIbre3O(etc) agent
debug1: Server accepts key: /home/username/.ssh/id_rsa RSA SHA256:j3MUkYzhTrjC6PHkIbre3OT(etc) agent

where (etc) is some redacted text. It seems the server is ACCEPTING the key, which is nice. But then it's still a blinking cursor...

[–] NeoNachtwaechter 2 points 4 months ago (1 children)

It seems the server is ACCEPTING the key

Check if it is true. In the server logs.

[–] [email protected] 4 points 4 months ago* (last edited 4 months ago) (1 children)

I'm not sure which logs I can and should check, but when I listen to this: sudo tail -f /var/log/auth.log

I only get this right after I ctrl+C on my blank / blinking cursor screen. (Did this 3 times in a row.)

2024-08-14T11:35:32.874228+02:00 pidoos sshd[3957]: Connection closed by authenticating user pi MY_PUBLIC_IP port 52242 [preauth]
2024-08-14T11:35:50.168160+02:00 pidoos sshd[3975]: Connection closed by authenticating user pi MY_PUBLIC_IP port 39266 [preauth]
2024-08-14T11:35:55.236347+02:00 pidoos sshd[3987]: Connection closed by authenticating user pi MY_PUBLIC_IP port 41318 [preauth]

Where MY_PUBLIC_IP is redacted. I'm not even sure why my public IP is showing. I connect locally. But ports are forwarded, yes.

Using sudo journalctl -u sshd -f does not seem to output anything...

[–] gedhrel 2 points 3 months ago

That's only part of the handshake. It'd require agent input around that point.

[–] [email protected] 6 points 3 months ago

The whole point of ssh-agent is to remember your passphrase.

replace passphrase with private key and you're very correct.

passphrases used to login to servers using PasswordAuthentication are not stored in the agent. i might be wrong with technical details on how the private key is actually stored in RAM by the agent, but in the context of ssh passphrases that could be directly used for login to servers, saying the agent stores passphrases is at least a bit misleading.

what you want is:

use Key authentication, not passwords
disable passwordauthentication on the server when you have setup and secured (some sort of backup) ssh access with keys instead of passwords.
if you always want to provide a short password for login, then don't use an agent, i.e. unset that environment variable and check ssh_config
give your private key a password that fits your needs (average time it shoulf take attackers to guess that password vs your time you need overall to exchange the pubkey on all your servers)
change the privatekey every time immediately after someone might have had access to the password protected privkey file
do not give others access to your account on your pc to not have to change your private key too often.

also an idea:

use a token that stores the private key AND is PIN protected as in it would lock itself upon a few tries with a wrong pin. this way the "password" needed to enter for logins can be minimal while at the same time protecting the private key from beeing copied. but even then one should not let others have access to the same machine (of course not as root) or account (as user, but better not at all) as an unlocked token could also possibly be used to place a second attacker provided key on the server you wanted to protect.

all depends on the level of security you want to achieve. additional TOTP could improve security too (but beware that some authenticator providers might have "sharing" features which could compromise the TOTP token even before its first use.

[–] [email protected] 5 points 3 months ago (1 children)

FWIW, I've found that the -v flag often doesn't say why it's not using your key, just that it isn't using your key and it has fallen back to password authentication.

It's usually not terribly helpful for figuring out why it's not using your key, just that it's not using your key, which you kind of already know if it's prompting you for a password. lol

[–] [email protected] 2 points 3 months ago

Because it's basically axiomatic: ssh uses all keys it knows about. The system can't tell you why it's not using something it doesn't know it should be able to use. You can give a -i for the certificate to check if it doesn't know it because the content is broken or the location.

That said: this doesn't make -v more useful for cases like this, just because there's a reason!

[–] [email protected] 2 points 3 months ago (1 children)

Not OP but everytime I used the verbose output of ssh it didn't help me one bit. Even adding outrageous verbosity I was still quite confused on what step failed and which didn't.

I'm probably just bad at understanding SSH but i don't know it seems like ssh workflow includes many trial and error until it finds a way to connect.

Imo the verbose output of SSH is often not very helpful if you don't know very well ssh in the first place. Obviously it is still worth a shot and a good advice but don't expect ssh to clearly state what is going on :)

[–] INeedMana 1 points 3 months ago (1 children)

Well, you have configuration and flag options to define what is it supposed to be trying to use. What order, I think too. But definitely understanding SSH a little bit will make the log more understandable. As with everything tbh :D

[–] [email protected] 3 points 3 months ago

This likely isn't helpful but it isn't meant to be a shitpost. However, I will point out this literature:

SSH, The Secure Shell: The Definitive Guide, 2nd Edition

https://github.com/manish-old/ebooks-2/blob/master/O'Reilly%20-%20SSH%20The%20Secure%20Shell%20The%20Definitive%20Guide-2.pdf

Other commenters clearly know more than me about tbs ssh, so I'll otherwise remain silent.

[–] [email protected] 22 points 4 months ago (1 children)

Maybe ssh can't find the key automatically. What is the path to your private key?

[–] [email protected] 4 points 4 months ago (1 children)

I'm pretty sure I generated it to ~/.ssh/id_rsa which I think the default location. It is also the location shown in the terminal image in my post.

[–] Phrodo_00 2 points 3 months ago

I think some distros disable using RSA by default. Might need to use it explicitly.

[–] [email protected] 12 points 4 months ago (3 children)

As mentioned, -v (or -vv) helps to analyze the situation.

My theory is that you already have something providing ssh agent service, but that process is somehow stuck, and when ssh tries to connect it, it doesn't respond to the connect, or it accepts the connection but doesn't actually interact with ssh. Quite possibly ssh doesn't have a timeout for interacting with ssh-agent.

Using eval $(ssh-agent -s) starts a new ssh agent and replaces the environment variables in question with the new ones, therefore avoiding the use of the stuck process.

If this is the actual problem here, then before running the eval, echo $SSH_AUTH_SOCK would show the path of the existing ssh agent socket. If this is the case, then you can use lsof $SSH_AUTH_SOCK to see what that process is. Quite possibly it's provided by gnome-keyring-daemon if you're running Gnome. As to why that process would not be working I don't have ideas.

Another way to analyze the problem is strace -o logfile -f ssh .. and then check out what is at the end of the logfile. If the theory applies, then it would likely be a connect call for the ssh-agent.

[–] [email protected] 5 points 4 months ago (1 children)

which ssh

which ssh-agent

[–] [email protected] 4 points 4 months ago

I guess it's worth checking if those names point to the expected binaries, but I also think it would be highly unlikely they would be anything else than just /usr/bin/ssh and /usr/bin/ssh-agent.

[–] [email protected] 3 points 3 months ago (2 children)

My theory is that you already have something providing ssh agent service

in the past some xserver environments started an ssh-agent for you just in case of, and for some reason i don't remember that was annoying and i disabled it to start my agent in my shell environment as i wanted it.

also a possibility is tharlt there are other agents like the gpg-agent that afaik also handles ssh keys.

but i would also look into $HOME/.ssh/config if there was something configured that matches the hostname, ip, or with wildcards* parts of it, that could interfere with key selection as the .ssh/id_rsa key should IMHO always be tried if key auth is possible and no (matching) key is known to the ssh process, that is unless there already is something configured...

not sure if a system-wide /etc/ssh/ssh_config would interfere there too, maybe have a look there too. as this behaviour seems a bit unexpected if not configured specially to do so.

load more comments (2 replies)

[–] [email protected] 2 points 4 months ago* (last edited 4 months ago) (2 children)

I didn't really follow the former part, but I can give you this:

strace -o logfile -f ssh -p 8322 [email protected] of when I get blank

[–] gedhrel 6 points 4 months ago

Please don't ignore the advice about SSH_AGENT_SOCK. It'll tell yoy what's going on (but not why).

[–] [email protected] 2 points 3 months ago (2 children)

At the end of the log you find:

822413 connect(4, {sa_family=AF_UNIX, sun_path="/run/user/1000/gcr/ssh"}, 110) = 0
...
822413 read(4,

meaning it's trying to interact with the ssh-agent, but it (finally) doesn't give a response.

Use the lsof command to figure out which program is providing the agent service and try to resolve issue that way. If it's not the OpenSSH ssh-agent, then maybe you can disable its ssh-agent functionality and use real ssh-agent in its place..

My wild guess is that the program might be trying to interactively verify the use of the key from you, but it is not succeeding in doing that for some reason.

load more comments (2 replies)

[–] gedhrel 7 points 4 months ago (1 children)

Without the ssh-agent invocation:

what does ssh-add -L show?
what is the original SSH_AUTH_SOCK value?
what is listening to that? (Use lsof)

This kind of stuff often happens because there's a ton of terrible advice online about managing ssh-agent - make sure there's none if that baked into your shellrc.

[–] [email protected] 4 points 3 months ago* (last edited 3 months ago) (3 children)

ssh-add -L
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAACAQCqS5l(redacted)f0phb8x+fUV1w== username@computername

echo $SSH_AUTH_SOCK
/run/user/1000/gcr/ssh

lsof $SSH_AUTH_SOCK
COMMAND      PID    USER FD   TYPE             DEVICE SIZE/OFF    NODE NAME
gcr-ssh-a 778406 username  3u  unix 0x000000007e25ee6b      0t0   30290 /run/user/1000/gcr/ssh type=STREAM (LISTEN)
gcr-ssh-a 778406 username  6u  unix 0x0000000020f5b559      0t0 2096642 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 12u  unix 0x00000000a6756d60      0t0 2100347 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 15u  unix 0x00000000625cb05a      0t0 2261237 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 21u  unix 0x00000000d0b214f9      0t0 2261238 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 23u  unix 0x00000000a2f197fe      0t0 2349665 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 27u  unix 0x00000000da22a130      0t0 2349668 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 29u  unix 0x000000004f7a1723      0t0 2365382 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 33u  unix 0x00000000e26976b3      0t0 2365389 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 35u  unix 0x00000000b8185a8a      0t0 2375648 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 39u  unix 0x00000000ba41030c      0t0 2375649 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 41u  unix 0x000000006867cb01      0t0 2380999 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 45u  unix 0x0000000091384b95      0t0 2381008 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 47u  unix 0x00000000d5b28b08      0t0 3729149 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)
gcr-ssh-a 778406 username 51u  unix 0x00000000f65088aa      0t0 3731006 /run/user/1000/gcr/ssh type=STREAM (CONNECTED)

All before issuing the ssh-agent

[–] gedhrel 4 points 3 months ago

It's the gnome key ring ssh agent.

It's possible that this has popped up a window asking gor permission / a passphrase / something and you're not seeing that.

[–] gedhrel 1 points 3 months ago (1 children)

Okay, that agent process is running but it looks wedged: multiple connections to the socket seem to be opened, probably your other attempts to use ssh.

The ssh-add output looks like it's responding a bit, however.

I'd use your package manager to work out what owns it and go looking for open bugs in the tool.

(Getting a trace of that process itself would be handy, while you're trying again. There may be a clue in its behaviour.)

The server reaponse seems like the handshake process is close to completing. It's not immediately clear what's up there I'm afraid.

[–] gedhrel 1 points 3 months ago (4 children)

Is this problem a recurring one after a reboot?

If it is it warrants more effort.

If not and you're happy with rhe lack of closure, you can potentially fix this: kill the old agent (watch out to see if it respawns; if it does and that works, fine). If it doesn't, you can (a) remove the socket file (b) launch ssh-agent with the righr flag (-a $SSH_AGENT_SOCK iirc) to listen at the same place, then future terminal sessions that inherit the env var will still look in the right place. Unsatisfactory but it'll get you going again.

load more comments (4 replies)

[–] [email protected] 1 points 3 months ago (1 children)

Search for /run/user/1000/gcr/ssh on the Internet. I'm on my phone and didn't find the solution, but I'm sure you'll find it.

[–] [email protected] 3 points 3 months ago

I searched. When I change this variable (path), it works. So in the startup script for my terminal (~/.zshrc) I added this:

SSH_AUTH_SOCK=/tmp/ssh-agent-$USER-socket
export SSH_AUTH_SOCK

Now it works, but I'm not sure why. Anything BUT /run/user/1000/gcr/ssh works I think

[–] netvor 5 points 4 months ago (4 children)

please, it's eval "$(ssh-agent -s)" (quotes!)

load more comments (4 replies)

[–] [email protected] 2 points 4 months ago (1 children)

Where is the key? What are the permissions for it?

[–] [email protected] 2 points 4 months ago (1 children)

it got 600 both the private and public key, stored in ~/.ssh/

[–] [email protected] 1 points 4 months ago (1 children)

Often permissions can be an issue. I'd check permission for directory and files and hinr directory for user and group.

Sample permissions here: https://jonasbn.github.io/til/ssh/permissions_on_ssh_folder_and_files.html

Many. Ssh issues I've had have been permissions issues.

[–] [email protected] 1 points 3 months ago

yeah I copied the permissions as shown, makes no difference. Maybe the ownership is wrong? Both group and owner is me

[–] [email protected] 2 points 4 months ago (1 children)

Can you try killall ssh on the client, and then try to ssh into the rpi again?

[–] [email protected] 1 points 4 months ago

tried.

[–] [email protected] 1 points 4 months ago (1 children)

I have no idea why but ssh seems to not use keys with different names by default

[–] [email protected] 1 points 4 months ago* (last edited 4 months ago) (1 children)

can you expand on that? What do you mean different names? My PC has of course a different username than the server I'm connecting to. The label name at the end of the key is just a comment, so this is also not what you're referring to, I think.

load more comments (1 replies)

[–] [email protected] 1 points 4 months ago

Try running ssh with -vv to get a better idea of the problem when no ssh agent is running.

[–] [email protected] 1 points 4 months ago (1 children)

are you using fish shell?

[–] [email protected] 1 points 4 months ago (1 children)

I have zsh

load more comments (1 replies)

[–] [email protected] 1 points 3 months ago (4 children)

Can you post the result of the env command as well? It sounds like your config is very minimal, but the fact that it's looking for a local Unix socket in the strace output is weird.

load more comments (4 replies)

load more comments