3DPrinting

15641 readers

290 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

Creality K1 / K1 Max Quieter Slicer Profile (self.3dprinting)

submitted 10 months ago* (last edited 10 months ago) by 4lan to c/3dprinting

4 comments fedilink hide all child comments

I ended up doing some experimenting to see how low I can make the fans go without sacrificing print quality and came up with this profile that is significantly quieter. It prints a 22min flawless benchy despite lower fan speeds. Thought I'd share it in case anyone else wants to use it

I have been putting my K1 Max in my laundry room due to the jet-engine/vacuum cleaner sounds it makes when printing. I got annoyed having to move it when doing a load, so decided to try to quiet it down a bit so I can have it nearby in my office.

I used butyl sound dampening sheets on the side panels, but that only helped with vibration noise from the side fans. It helps, but not enough.

Speed: 300 mm/s
Acceleration: 12,000 mm/s²
Max Fan: 40%
Chamber Fan: Off
Side Fan: 20%

Important: One thing to keep in mind is that if your minimum layer time (in cooling section) is too low your fans will run at 100% when your layers are less than this time, despite what you have fans set at in the profile. If you are printing a smaller model you might get some periods of high fan speed. Just adjust the min layer time for these instances. I have it set to 2 seconds, but 5 should be better for very small prints

Profile Download: https://drive.google.com/file/d/1o_MRKWpwETTULHfVH4gRRadcLowg9RR5/view?usp=sharing-

top 4 comments

sorted by: hot top controversial new old

[–] vladmech 3 points 10 months ago (1 children)

Saving this as I hope to get a K1 Max next week and replace the CR-10 in my home office; didn’t realize they were so loud out of the box!

[–] 4lan 4 points 10 months ago* (last edited 10 months ago) (1 children)

That's funny, I have a CR10 as well!

but yeah, the K1 and Max are just as loud as Bambu printers. It sounds kind of like someone is vacuuming when its at full blast lol.

I actually added a second side-fan to my K1 Max using this.

Overall I think you'll love the Max, just be sure to shop around for deals. I got mine for $680 instead of $900, don't pay full MSRP! I think it's $700 at microcenter right now

Also, here is my FAST profile that is loud but impressively fast.

[–] vladmech 4 points 10 months ago

The only Microcenter in my state is 400 miles away but my wife is headed down that way this coming weekend and I’ve already sweet talked her into snagging me one, I’m super excited! Thank you for the profiles, I’m jazzed to see how quickly it can spit stuff out.

[–] [email protected] -1 points 10 months ago

New Lemmy Post: Creality K1 / K1 Max Quieter Slicer Profile (https://lemmy.world/post/10712707)
Tagging: #3dprinting

(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)

I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md