3DPrinting

14788 readers

345 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

[SOLVED] Any ideas what causes this in overhangs? (lemmy.world)

submitted 2 months ago* (last edited 2 months ago) by UnH1ng3d to c/3dprinting

16 comments fedilink hide all child comments

When I do an overhang test, I always have this problem at about 35°. Does anyone have a suggestion what could be causing it?

Slicer: Orca
Layer height: 0.2mm
Infill: 0% (this has improved it a lot, I think the infill was causing bulging)
Outer walls: 2
Overhang speed: 10 or 20mm/s (both look the same)

Solution: I mistakenly thought overhang speed in Orca was based on overhang angle, it is percentage instead (which makes much more sense for different layer heights). My 10-25% overhang speed wasn't set to slow down and that must translate to about 35° at 0.2mm layer height. I now have it set to 30mm/s and it now looks great 👍 And sorry, I was wrong when I stated the overhang speed 😅

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 2 months ago (1 children)

Looks like drooping to me, I would see if lowering nozzle temp improves/solves this

[–] UnH1ng3d 1 points 2 months ago

Thanks, I'll give it a go.