3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I've had a couple: a cheap Anet A8 clone, and a Prusa MK3. I did ABS and PLA on the A8, and PLA and PETG on the Prusa. My Prusa is now outdated, and I don't have the A8 anymore. Both printers look the same to a layman. Here's what I know.
The A8 was dirt cheap. Like $250 cheap. I think the Prusa was about $600 a couple years later. The print size was the same or very close on both, (250x250, 210 high).
The A8 relies on manual bed leveling. It sucked. The Prusa has a magnetic sensor that creates a level map in firmware and adjusts the printhead to follow the warp of the bed automatically for every print.
The A8 has an aluminum bed. It required kapton tape, or gluestick, or some way to get the print to adhere to the bed. I eventually used a sheet of glass with gluestick. The Prusa has a PEI bed, that just works as long as it's clean.
Both of them have an E3D hotend with interchangeable nozzles using an M6 thread. Not the easiest thing to swap, but pretty simple anyway. The built-in Z-correction on the Prusa only selects for a few standard nozzle sizes (.25, .4(standard), .6, .8, and maybe 1.0). That's a good range and probably enough. You can also forgo the built-in Z-adjustment and use any number of first-layer calibration models on the internet.
Both of them have a heated bed. And of course heated nozzle. You'll have to check the temperature ranges yourself and see if your materials match.
You'll have to select a Slicer program to use with your printer. I used Cura with the A8, and Prusaslicer with the Prusa. It's up to you if you want to tinker more (Cura) or just print (Prusaslicer). There are so many options here, it's impossible to touch on them all. This is where you adjust the layer height, and as long as your Z-axis motors can handle the fine adjustments it should be fine.
Neither come with an enclosure, which is something to consider for certain materials. I built one for my Prusa out of an IKEA table, to keep furry family members out of it.
In all, I wouldn't recommend the A8 as a beginner printer. I had a lot of frustrations with it. Bed adhesion, bed leveling, belt tension. Very few successful prints, but I learned what I wanted for my next printer. The Prusa "just works", and I've had it for 5+ years now. There was also a concern with the A8 setting things on fire. The Prusa firmware can detect temperature runaway and abort automatically.
As a hobbyist, consider how much time you want to spend upgrading the printer. Both of these have a lot of "home-brew" parts on the internet allowing you to add various features (belt tension adjustment, better part cooling, etc.) My MK3 is now an MK3S+, and still going strong. I'm considering if I want to upgrade this to the MK4.