this post was submitted on 08 Feb 2024
118 points (94.7% liked)

3DPrinting

15784 readers
1099 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
118
4hr 40m Benchy! (lemmy.world)
submitted 10 months ago* (last edited 10 months ago) by 4lan to c/3dprinting
 

I finally got multi-color working on my Creality K1 Max using the 3D Chameleon.

Decided to make a 2 color benchy and scaled it down to 75% to save time, along with 0.25mm layer height.

So far the Chameleon has been pretty picky with filament, but when it works it works well! This print is with silk gold and matte black. I have even gotten 95A TPU to print with it surprisingly!

I modified the color-change code so it takes 1 minute less, which makes a big difference when you have hundreds of color changes.

Next up, 4 color benchy. Probably will be 10 hrs lol

you are viewing a single comment's thread
view the rest of the comments
[–] 4lan 3 points 10 months ago (1 children)

You can use any slicer you like. I have mine connected to Cura, Creality and Prusa slicers with the ability to send and start a print right from the slicers.

I never once set mine up with their Creality cloud app, you can skip that during setup and just do LAN and USB prints.

The key is to root it, which is really easy, then you can install Fluidd and have way more control during prints. You can even change your pressure-advance on the fly. There are tons of mods you can do after rooting such as these

from the looks of this post you can now use octoeverywhere on K1 printers

[–] [email protected] 3 points 10 months ago (1 children)

That's great, thanks so much! Pretty much seals the deal for me.

[–] 4lan 4 points 10 months ago* (last edited 10 months ago) (1 children)

Just don't pay MSRP! They often go on sale for $700. Got mine for $680 before tax!

If you do pull the trigger, here is my Creality slicer profile for quiet, yet fast, printing

[–] [email protected] 3 points 10 months ago (1 children)

Dude, you're awesome! Yeah I actually just saw that Microcenter has them for $699 rn, matches full retail for the Bambu P1S and $100 cheaper than the Prusa Mk4 self-assembled kit, which are the other two I've been looking at. Pretty sure my search is over.

[–] 4lan 2 points 10 months ago* (last edited 10 months ago)

I don't think you'll be disappointed. The size of the max has been useful already. did 298mm tall print that would be impossible on those printers. Literally printed myself some small trash cans lol