3DPrinting

15752 readers

161 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

Is anyone using a peltier dehumidifier in a drybox? (self.3dprinting)

submitted 11 months ago by overzeetop to c/3dprinting

17 comments fedilink hide all child comments

I'm reconfiguring my printing closet (~6'x6') for a new printer and thought about enclosing the printer in a moderate sized cabinet (~2'x3'x6' - one "shelf" of the closet) for thermal control. Since there will be inevitable opening and closing, as well as just normal infiltration of the ambient air (usu ~65F between 40-75% RH) it would seem like a good application for a Peltier dehumidifier to keep the RH in the chamber low and reduce my need to re-dry filament which has been on the machine during (inevitable) multi-day or -week downtime between projects.

you are viewing a single comment's thread
view the rest of the comments

[–] callcc 2 points 11 months ago (1 children)

Interesting technology those peltier dehumidifiers. I had never heard of them.

My question would be about efficiency. I could imagine this working well in a very humid environment to save your filament.

From my limited understanding of the physics of wet air I would imagine that it's tough to remove humidity via condensation when the air is already pretty dry.

Why not just remove the spool after your last job of the day and store it in a plastic zip-lock bag? That saves power, production of a peletier dehumidifier and cost of buying one. I do this and never had trouble with wet filament.

[–] [email protected] 2 points 11 months ago

In Florida, I run a dehumidifier in my garage, and it pulls a couple gallons a day. It'll get uncomfortably dry, if you let it. It'll keep the relative humidity down around 25%, according to its display.

I've used those pellets before too. They get used up almost immediately, even in a vacuum sealed bag.

I have a smaller dehumidifier in my bedroom. I think it cost me around 30 bucks and it also keeps things super dry. Once I have a relatively sealed space for my filament I'll probably put one in there too.