3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
This is the second time this has happened. It looks like it added part of the model on to the side. Is it my slicer? I'm using a Creality Halot Mage, and Chitubox 1.9.5 because that is the only slicer I've gotten to work on Fedora that supports my printer that I've found. I'm completely new to all things 3d printing. This is my first printer and that is my sixth print in the picture.
Not the OP, but what do you mean by this? I feel there's an implication that it should be laid out a different way?
With resin printers you don't want to print flat on the build plate, you want them angled. I'm not the best person to explain this since I've only worked with FDM printers but nobody else seems to want to answer lol.
Contrary to fdm printing, resin printing doesn't like large xy cross-sections because that means huge forces between the part and the fep.
This suction and pulling can lead to delamination of layers.
You typically want to angle parts and spam a bunch of supports. Which really is usually the opposite of what you wanna do on an fdm printer.
Ah, I did not pick up on this being a resin printer. Thanks for the info, I'm not too aware on the tech behind resin