3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
The process is pretty simple. "difference", "subtract" or "hole" (tinkercad. don't ask me why they call it that.) all do the same thing. It's a boolean operation that removes one shape from another shape.
you create the shape and subtract the middle bit (a square slightly smaller than the adapter part itself.) Then put the adapter centered in the gap, and use a second boolean operation (usually called "join", tinker cad calls this "grouping"... don't ask.)
Sometimes you'll see a third option in there called 'intersect', which will cut both parts down to only where they overlap, FYI.
So the process is to import your files, remove the bits that need to be removed... then join the adapter to the case, and export as an STL. the reason it's important that the block your using to remove is slightly smaller is so that the adapter joins in a solid manner.
if you're willing to give tinker cad another go, this video, while basic covers everything you need to do to get it done.
ETA: I think you're going to have difficulty printing the combined part. the case appears intended to print with the back against the bed. you might be able to print it on edge, but the adhesion is going to suck and the nozzle dragging is likely to pull it off. you could also add supports, but then... well... support removal.
Thanks- I'll check it out! I liked how simple TinkerCAD felt, and was hoping to use it, if I can, that'd be awesome
Here is an alternative Piped link(s):
this video
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source; check me out at GitHub.