3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
I just want to brag a bit. Printed on an Anycubic Kobra 2. Runs without much problems. At the moment 10 Days on a single winding, tweakble up to 32 days. The weight is from another wooden self build clock.
Edit: cant i upload videos?
Edit 2: https://www.myminifactory.com/object/3d-print-32-day-clock-easy-build-156759 (12$)
Edit 3: I just printed this clock, i didnt plan it myself if this is unclear...
Filament change is buggy, yes. It worked exactly one time for me. Didnt get it to work again. I just paused the print in time and changed "manually".
I modified the start and end gcodes like described here. its german tho,so here the modified gcodes directly: https://drive.google.com/file/d/1MnAVLDR7czikQ_prklkgt-AMtqOvZ3aV/view
It prints 5 lines before the actual print to help with dripped empty nozzle. The first lyer will be much better. Also it pushes the heatbed to the front instead to the back after printing.
After automatic leveling, you can modify the z-offset to fit with the settngs in the slicer. But watch out to not ram the nozzle into the bed. So watch out with setting it lower, higher shouldnt make problems.
Have fun printing!
Here is an alternative Piped link(s):
described here.
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source; check me out at GitHub.