this post was submitted on 14 Jun 2023
6 points (100.0% liked)

3DPrinting

15542 readers
224 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

Basically the filament run out sensor on my Anycubic Kobra Neo is triggering randomly and this is compromising the larger prints.

Did you have the same problem or do you know how i can fix it?

you are viewing a single comment's thread
view the rest of the comments
[–] Fauxreigner 2 points 1 year ago (1 children)

Make sure both ends of the cable are seated firmly.

Open the sensor up and check for any debris that may interfere with the microswitch.

If both of those are ok, you'll want to check continuity of the cable with a multimeter, to make sure the cable hasn't broken internally somewhere. Once that's confirmed good, tape the switch closed and test continuity through the switch. Typically those sensors are made with really cheap microswitches, so you may need to just swap it out with a more reliable switch.

Good news is they're extremely simple, and so pretty easy to test.

[–] Redkefy 1 points 1 year ago (1 children)

Thanks, right now the filament is loose, i will try to make it more guided and see if that helps. Plan B is to open the sensor and see if everything is ok.

[–] Fauxreigner 2 points 1 year ago

Yeah, if the filament is loose that should be your first step, it may not be able to keep the switch closed consistently.