3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Not sure I'd describe any printer Creality manufactured after 2019 as "solid" :) They have really shitty quality assurance, so it's a bit of a gamble when buying anything from them.
I'd also take the "5x faster" claims from Anycubic's marketing with a massive grain of salt, and I'm fairly sure you'll get the same speeds on any printer that isn't a just another clone of 5 year old designs. The Kobra 2 has a volcano style hotend, but if you buy a different printer and the hotends melt capacity is the limiting factor you can just put a CHT nozzle in it, either genuine from Bondtech or a high quality Chinese clone like Mellow or Trianglelab.
Not entirely sure how the LeviQ thingy on the Kobra 2 works, but if it is what I think it is, then it'll automate the nozzle-probe distance (a.k.a. probe Z offset) calibration which is very nice. Having a probe automates the bed level compensation, but I've always found it somewhat annoying having to recalibrate the nozzle-probe distance every now and then.
Finding some mixed info regarding the type of hotend the Kobra 2 has.. One review claiming that it is all-metal, while another saying it's PTFE lined. If you're only going to print PLA it doesn't matter, but if you want to print filaments that require higher temps you might need to upgrade it.
Apart from the LeviQ I think these two printers and Sovol SV06 are very similar feature wise. The SV06 is one of the few cheap printers that come with all-metal hotend, but that's usually a pretty easy upgrade on others.
Thanks for the detailed answer