281
Some Cybertruck Owners Say Their Trucks Are Shedding Body Panels; One Thinks He Knows Why
(www.roadandtrack.com)
this post was submitted on 23 Feb 2025
281 points (98.6% liked)
News
25295 readers
5452 users here now
Welcome to the News community!
Rules:
1. Be civil
Attack the argument, not the person. No racism/sexism/bigotry. Good faith argumentation only. This includes accusing another user of being a bot or paid actor. Trolling is uncivil and is grounds for removal and/or a community ban. Do not respond to rule-breaking content; report it and move on.
2. All posts should contain a source (url) that is as reliable and unbiased as possible and must only contain one link.
Obvious right or left wing sources will be removed at the mods discretion. Supporting links can be added in comments or posted seperately but not to the post body.
3. No bots, spam or self-promotion.
Only approved bots, which follow the guidelines for bots set by the instance, are allowed.
4. Post titles should be the same as the article used as source.
Posts which titles don’t match the source won’t be removed, but the autoMod will notify you, and if your title misrepresents the original article, the post will be deleted. If the site changed their headline, the bot might still contact you, just ignore it, we won’t delete your post.
5. Only recent news is allowed.
Posts must be news from the most recent 30 days.
6. All posts must be news articles.
No opinion pieces, Listicles, editorials or celebrity gossip is allowed. All posts will be judged on a case-by-case basis.
7. No duplicate posts.
If a source you used was already posted by someone else, the autoMod will leave a message. Please remove your post if the autoMod is correct. If the post that matches your post is very old, we refer you to rule 5.
8. Misinformation is prohibited.
Misinformation / propaganda is strictly prohibited. Any comment or post containing or linking to misinformation will be removed. If you feel that your post has been removed in error, credible sources must be provided.
9. No link shorteners.
The auto mod will contact you if a link shortener is detected, please delete your post if they are right.
10. Don't copy entire article in your post body
For copyright reasons, you are not allowed to copy an entire article into your post body. This is an instance wide rule, that is strictly enforced in this community.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
How the hell is that thing legal to sell??
There's a reason why Musk is paying to dismantle the government.
It's not over here in the UK. They're not road legal.
There's a reason why the EU won't allow the sale of cybertrucks and it all has to do with ~~build quality and~~ safety.
Edit: strikethrough added based on incorrect assumption as pointed out below
I thought it was purely due to inadequate rounding of angles on the body due to stricter pedestrian safety laws that the EU has. Does the EU have some kind of build quality testing and standard that the cybertruck failed?
I actually didn't quite remember the reason, so I checked it. The rounding is one main reason and the fact it is so heavy it requires a drivers license for trucks, as well as basically no demand. So no build quality requirements failed, but definitely safety related.
There's no consumer protection agency anymore. I wonder why.
I worked at the Tesla plant in Fremont for a bit and most of every car is held together with adhesive. They claim it's super strong and once heated, it's stronger than welding... But, I mean... They are still falling apart and I don't know if that's because the adhesive sucks or if it's because every single day, they had to have someone remind everyone that the glue pattern posted at every station where it's applied isn't just a suggestion, it's an engineering requirement for the structural integrity of the part. People were just slapping the adhesive onto shit in any old way they pleased a lot of the time.
Essentially every car has a windshield and trim attached only by adhesive, and has for decades. This ought to be a solved problem.
Is that trim piece steel? Maybe something about the material, usually they’re gluing on plastic trim pieces. They’re relying on heated adhesive but it’s a long skinny piece made of a material that conducts heat?
Yeah, used properly, adhesive can be stronger than just about any other form of fastening. Properly is the key word. Contaminates, or improperly prepped surface will drastically reduce the effectiveness.
Hell, surface coatings to protect against rust are a multi-billion industry and they often require very specific application methods and even a little deviation can fuck up the bond.
(X) to doubt
Adhesives can be incredibly strong.
But never a weld.
MEK welds styrene. Cynocrylate forms a mechanical bond. MEK will be stronger in tension, cyno stronger in shear.
Good ole methyl ethyl ketone.
Dropped a rubber boot in a vat of it once to see what would happen.
No idea why, but it came out much larger/expanded.
Fun fact, you can shrink barbie doll heads in acetone.
I don't even know the name of the adhesive they used. I do know that it was made by 3M and that it's orange.
Well, OK. So maybe that adhesive is stronger than a weld on that particular plastic. Of course, if you're talking about adhering a plastic to a metal you cannot weld it so Elmer's would be "stronger than a weld". But whatever's going on it's not adequate.
E: and actually welding plastic together typically isn't that strong, a mechanical bond can easily be stronger than melting the plastic to weld it.
Epoxy bonding on body panels is super common on many cars now. And it’s the only way to bond incompatible materials like aluminum and high strength steel.
Even steel body panels can’t be welded to high strength steel because the heat affected zone will be weakened by the weld and will crack just outside the weld.
Adhesives to create a mechanical bond, and the 3M body adhesives include glass microbeads that prevent you from squishing the joint too tightly, which makes the bind more effective.
Now using it in dirty or coated stainless steel clearly isn’t working, and the design of thin strips of shiny steel that will grow and shrink a lot, mostly in one direction on a design that was done by a 7 year old in a hurry to draw a truck is another issue.
In other words, the things were being designed by underqualified engineers who didn't understand factors of safety, design for manufacturability, or that precision comes at a cost.
I suspect the real issue is the workers aren't given enough time on the line to do this correctly so they just churn them out to hit the needed metric knowing it will fail after being delivered to the owner.
Hence,
That cost could be needing to use precision robot arms instead of humans, needing to pay higher salaries to find really skilled and diligent humans, or as you suggested, slowing down the assembly line so the workers have time to be more careful.
Adhesive binding can be significantly stronger than mechanical bonding when done right.
...when done right. Yeah. Guess where I'm putting my money.
Odds the pace of the line is too fast to do it right?
Cuz 'Murica!
Adhesives are used everywhere on cars, especially on trim pieces. But you have to prep the parts, which could mean sanding and scuffing, cleaning with solvents, or even (on larger parts) flame or plasma treatment.