3DPrinting

15897 readers

73 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

first timer here, Sovol3D S06 ACE arriving this week, open to suggestions :) (www.sovol3d.com)

submitted 3 days ago by [email protected] to c/3dprinting

5 comments fedilink hide all child comments

After immersing myself in 3D printer content on YouTube and Lemmy, I'd talked myself all the way up to spending AU$2000 which is just absurd for a first timer, but then talked myself into the Sovol3D S06 ACE as a decent starting point, haha

Anyhow, I'll be running this in my garage (garage door open) and I think the first batch of filament in the pack is either PLA or PETG, which seems beginner friendly

I've been wondering about 3D printer profiles and calibration in slicer apps... is there a way to print as many benchies that will fit on the bed, but each which different profile parameters, so I can see which profiles do or don't work best? Or do current slicer apps always produce a plan that uses the same parameters for the entire job?

Note that I'm 100% on Linux (no Windows here), so I'm probably limited to https://github.com/prusa3d/PrusaSlicer or https://github.com/SoftFever/OrcaSlicer (or maybe https://github.com/GladiusSlicer/GladiusSlicer if I'm in the mood for contributing my own code)

I've consumed probably too much YouTube at this point, but any especially important hints and tips for a first timer would be appreciated!

P.S. oh, just noticed, https://lemmy.ml/post/23597074 thanks!

you are viewing a single comment's thread
view the rest of the comments

[–] SzethFriendOfNimi 2 points 2 days ago* (last edited 2 days ago)

No need to feel like an idiot, I’ve done it too. Even looked up how to do some obscure thing only to find a link I’ve read before and comes out I have a bookmark for it from a year or so ago.

As for switching settings across objects I agree. I use these things when dialing in one setting across a range such as flow rate. Never for an entire print, though, since a failed print component is going to be dragged across others, etc.

Or the change in temp, flow, retraction, etc may cause strings, or blobs, etc. to affect the others when it’s printing the layers. Unless you’re doing one object at a time which presumes they’re small enough, etc. And even then it failing could mean what remains of the entire object may be dragged across hitting others. It’s just not worth the hassle.

It does show them thinking about processes which is a good mindset to have though.

Experience is a good teacher in this hobby.