3DPrinting

15677 readers

121 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

Has anyone used a 3D pen on PLA prints? (lemmy.sdf.org)

submitted 11 hours ago by [email protected] to c/3dprinting

15 comments fedilink hide all child comments

I designed a part that has compartments for small neodymium magnets. The compartments open up on the side of the part, but ideally the entire part should look smooth and featureless, and the epoxy I use is not the same color as the PLA. Also, I'd like to be able to fish out the magnets later, and epoxy is a bit too final for my taste.

So I'm thinking of dropping a small dollop of melted PLA into the openings to seal them, then file / polish them smooth. It would be sticky enough to hold the magnets in place yet easy to pop off with something pointy or sharp if need be.

And to do that cleanly, I figured I'd get me one of those cheap freehand 3D pens as a kind of precision "glue gun" for PLA. And it occurs to me that I might also be able to use it to "weld" small parts together, and hand-write things on parts with a different color filament.

I'm not much of an artist so I have no use for a 3D pen as an artsy tool. But it seems like a useful thing to have alongside a 3D printer, and they're not that expensive - even the more expensive Mynt3D 3D Pen Pro, which is the one I'm eyeing.

Does anybody know if those 3D pens can be used for small manual reworks / assembly of PLA parts?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 2 hours ago* (last edited 24 minutes ago)

I thought of doing something similar, but dovetailing the edge of the hole and making the plug slightly thicker so I could actually hammer it in - possibly cold - and make the material flow into the dovetail. Exactly like metal inlays. This would mechanically lock the plug in place.

Unfortunately, the walls around the magnets are really thin, so any hammering or applying heat beyond what a printer would apply laying filament on them is likely to deform / destroy them.