3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I pretty much only use petg and abs. Petg really likes to ooze, I put a retract of 10-15mm at print end, I'd recommend bringing up to print temp only when you need to (heatup bed and set the nozzle to 150, do your bed level, then heat to print temp, my voron does that and has way less ooze). It also, at least for me, loves to cling to the nozzle so nozzle cleanliness is key, I use a sock that covers all but the very tip of the nozzle which made a world of difference. First layer height is really important with that as well, too high and it just sticks to itself and makes a mess.
Check your filament as well, I personally like to go as hot as possible with petg as it seems to flow better, the one I have right now is 230-250 with a bed of 70-90, 245 and 80 works well for that. Bridging and overhangs can be not great, had better luck with faster bridge speeds and high fan speeds.
Keep your surface clean, light brushing with warm soapy water is good periodic maintenance, I wipe down with 99 ipa to keep my sheet clean, ipa isn't the best degreaser but it's good to keep it maintained. Windex and then a wipe down with ipa has worked for me too.
I don't recommend printing directly on PEI, at least the prusa PEI sheet, it adheres extremely well to the point of tearing off PEI chunks, gluestick works well as a release agent. Textured sheets are nice and they self release when cold.
Key take aways though, keep everything super clean as bad adhesion is a bad time. I have had better luck with running things on the hotter end and turn up the cooling as I print in an enclosure. Get a dry box, I have a few desicant filled boxes as it really likes moisture.
Qucik edit: Prusa has some solid material guides for recommendations and things to know about different materials. Petg will adhere to surfaces strongly, I just saw you use a glass sheet and I've read some annedotal stories of people literally pulling chunks of glass off with a petg print, definitely use a gluestick or some other material for bed release, make your life easier.