3DPrinting

15819 readers

162 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

Filament Dryers (self.3dprinting)

submitted 2 years ago by EvilEwok to c/3dprinting

15 comments fedilink hide all child comments

So tried out some PETG for the first time, and the first couple prints went really well. but I believe it's picked up quite a bit of moisture, sitting in the basement.

What's the current recommendation for a filament dryer? there was one on /r/3dprintingdeals a bit back, a Sunlu S2. is the S1 good enough, or should someone who's fairly recreational with everything spring for a S2? I see food dehydrators recommended sometimes, is there anything specific to look for in one?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 4 points 2 years ago (1 children)

With all the rain we've been getting the past month I'll probably need a dryer too... I heard an oven works pretty well in a pinch.

[–] [email protected] 8 points 2 years ago (1 children)

The number of photos I’ve seen of completely melted filament rolls, due to either poor oven thermostats or inattentive users … I cannot endorse this technique.

If you’re on a budget, probably better to just power up your heated bed, with a box over top, and dry your spool inside there.

Repurposed food dehydrators seem to rate highly, if you can find a used one for cheap.

I ended up biting the $40 bullet and grabbing a Filadryer S2 when it was on sale.

[–] [email protected] 3 points 2 years ago

That, and if your filament has anything toxic that can off-gas when you heat it, you probably don't want it in your oven (if you use your oven for cooking food).

I'm not sure which filaments are or are not going to have any additives that might be problematic, but since almost nobody actually says what's in their filaments, it's probably a good idea to just assume it's all not good for you and keep it away from your oven.