seathru

joined 10 months ago
[–] [email protected] 0 points 4 months ago

It's one of the messier options but it still works well. The switches in my logitech g604 have been bounce free for over a year now after hosing then down with WD-40. That's longer than any of the warranty replacement mice lasted.

Deoxit leaves a residue, too, that will stain clothes. That residue is what helps the contacts from oxidizing again in the future.

[–] [email protected] 0 points 4 months ago (2 children)

Yeah alcohol works well. WD-40. too.

 

cross-posted from: https://lemmy.world/post/12365707

Tom, I'll gladly give you my address if you'll come put your money where your mouth is.

[–] [email protected] 6 points 4 months ago (6 children)

That is kind of just how non hall effect thumb sticks are. But I've had great luck with Deoxit D5. You have to take apart the controller so you can squirt it directly into the switch itself but as long as it's not a mechanical problem like a weak spring, the Deoxit usually gets it working like new.

[–] [email protected] 4 points 4 months ago

Listening to my modified Minimus 7’s highlight the poor mixing of the Alan Parsons Project.

[–] [email protected] 6 points 4 months ago

I love these. Thanks!

[–] [email protected] 7 points 4 months ago

It popped up for me too on their unlimited plan. I clicked the X and went on with my life.

[–] [email protected] 1 points 4 months ago (1 children)

https://i.imgur.com/AbsJjCh.jpeg

My concern is that those big beams (blue) end where they meet the plywood (yellow). Which means they are transferring their downward force into the board(s) highlighted in green. That in turn presses down on the vertical studs highlighted in red. These aren't connected to anything on the bottom. So the weight from the beams gets supported by the screws attaching all these pieces to the plywood wall? Maybe if they're just for looks and not structural support. Maybe that's how it's done in germany.

[–] [email protected] 17 points 4 months ago

Perhaps they should start a gofundme or something.

[–] [email protected] 5 points 4 months ago

My car insurance went up $1200 this year, which blows my mind. No reason given.

Kind of like jobs. If you stay with the same company for more than a couple years, you're probably doing yourself a disservice.

[–] [email protected] 1 points 4 months ago* (last edited 4 months ago)

They need very little water. Especially during winter. Seconding everything on the other comment too. I would repot them with fresh, well draining soil and if you see anything squishy and brown, cut it off. If you have to cut on the roots, leave it out for a day before putting it back in soil to let the cut callus over. Snake plants are tough, they won't mind.

Depending on your local climate, they would probably make better indoor plants. They'll tolerate low light areas that other plants won't.

https://i.imgur.com/58cO4y2.jpeg

One of my mom's that exploded the pot it was growing in. I wish I had got a better picture.

[–] [email protected] 5 points 4 months ago

Squeeze a third of the bottle into the trash, replace missing portion with Underwood ranches Sriracha, shake well and squirt on anything edible.

8
submitted 6 months ago* (last edited 6 months ago) by [email protected] to c/flashlight
 

Last month I got an email from [email protected] titled "Help Us Test Our New Products!" asking if I was interested in testing a new product and providing honest feedback. I've bought a few of their lights that I was happy with so I was glad to provide feedback (I assume that's where they got my email).

They replied with some instructions to search a specific term on amazon, send a screenshot where that item showed up in the listings, buy it, and send them the receipt for reimbursement.

It sounded like they were trying to game amazon, but they're a shit company so I didn't care. After sending them everything they requested (twice), it's been over a month with no reply. Before they would reply within 24 hours.

So if you see this email, ignore it. Or take your chances; Just make sure you return it before the window is up. And say it's a defect with the light, so you're not out for the return shipping.

Below are the emails.

Hi Sir, Greetings and good times. As a valued customer of Sofirn, we are excited to invite you to test our latest products.
Your feedback is incredibly important to us as we strive to continually improve our products and provide the best possible experience for our customers. If you have any inquiries about SC18.SC33.SC28.BS01.SP35T.HS41 and some other products, We would like to send you free products for them. All you need to do is try out our new products in your own environment and provide us with your honest feedback on your experience.
Your insights will be invaluable in helping us refine our products and make them even better. If you're interested in being part of this exciting opportunity, please reply to this email.
Please know that the quantity is limited, so please let us know if you'd like to participate as soon as possible. Thank you for your continued support of Sofirn. We look forward to your participation in our product testing program. Tips:

  1. This test is only available on Amazon US.
  2. This is legitimate.
  3. please DO NOT share this in public because it's a private offer.
  4. If you are not interested in this test, I can also offer you discounts on some models. Feel free to ask me. Best regards, Sofirn

Hello, Would you like to test the bike light ,BS01? If you are interested, I will send the steps. If not, it's ok. All the very best to you

Hi, Here is the steps for BSO1:

  1. Please search the keywords " bike lights" on Amazon to find it, and take a screenshot including the search term. Thank you for your patience in searching. Please let me know if you can't search.
  2. Please add a regular item to the cart and place the order.
  3. Please send me the screenshot you have taken in step 1, the order number, grand total, and your PayPal account. I'll refund you the money. If there are any questions, please let me know.Please don' post a review until I ask for it. Wishing you good health and happiness.
 

I have a Voxelab Aguila that I am about to install Klipper on. I also have a SKR E3 Turbo board left over from another printer.

Would it be worth installing the SKR board? Or will it not make any difference since the Pi is doing all the processing anyways?

 

According to the incident report, officers were called to a domestic disturbance/possible shooting in the 10900 block of SW 30th St. just before 2 a.m. Wednesday.

When they arrived, they found Deputy Jordan Reed Cannon shot to death.

Officials say she and her husband, Deputy Vaughn Cannon, were in a heated argument when Vaugh shot and killed Jordan.

view more: next ›