3DPrinting

15754 readers

112 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

Could use some help. (lemmy.world)

submitted 2 months ago by fubbernuckin to c/3dprinting

22 comments fedilink hide all child comments

So I'm trying to get my printer to a point where i can pretty consistently turn out high quality prints, but I'm at a point now where i get results like this. These two prints are from the same batch, same print job, and I'm completely clueless on how to fix it. I have an ender 3 v2 with a bltouch, I've adjusted the eccentric nuts, tightened the belts until the tips of my thumb and index finger couldn't tighten them any further, bed is level, using hatchbox pla. I know i can do ironing to fix the cosmetic problem, but I'd prefer to fix the root issue if possible.

you are viewing a single comment's thread
view the rest of the comments

[–] mvirts 6 points 2 months ago (3 children)

This is going to sound stupid, but don't forget to activate bed levelling after performing the leveling measurements. Maybe this is a stupid idea but I put M29 L1 and M29 A at the start of my gcode to load the ubl slot 1 mesh and activate it. Before getting ubl I used M420 S.

I spent way too much time frustrated by bad prints before I learned that leveling wasn't active.

[–] fubbernuckin 3 points 2 months ago (1 children)

I figured there might be something like this that i hadn't seen. I'll look into it tomorrow, i get the feeling this would cause the inconsistency.

[–] [email protected] 2 points 2 months ago (1 children)

Not sure how it works with your printer, but with mine on Klipper, after bed leveling I have to save and restart the firmware, and then I have to go back and select the profile that I just saved, otherwise it doesn't use it.

[–] mvirts 1 points 2 months ago

That ain't right 😹

Maybe try contacting klipper people https://github.com/Klipper3d/klipper/blob/master/docs/Contact.md

Or file an issue if you think it's a bug.

load more comments (1 replies)