this post was submitted on 25 Aug 2024
254 points (99.6% liked)

3DPrinting

15784 readers
1094 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
 

I don't print any abrasive materials at all. Pretty much only normal PLA and PETG.

I noticed, that my print quality gradually went down quite a bit, especially in the last few prints. I had a lot of stringing, weird blobs, and scarred surfaces.

Now, the print quality is as good as it should be!

They are dirt cheap. You can get a set of 10-15 generic ones, in different sizes, for only a few bucks. Don't forget that they are consumables.

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 50 points 4 months ago* (last edited 4 months ago) (19 children)

And if you do print aggressive abrasive materials, remember to either get a super expensive hardox nozzle, or just throw them away after each print. Woodfiber will murder any nozzle.

Gotta say though, your nozzle mostly looks dirty, not worn out (much)

[–] [email protected] 21 points 4 months ago (17 children)

This solution to abrasive filament is a tungsten nozzle or one of the ruby tip ones. The cost is a bit expensive but with a tungsten nozzle you might be one and done

[–] SmackemWittadic 12 points 4 months ago (8 children)

Forget about tungsten, get yourself a Diamondback nozzle They're pretty much indestructible regardless of the hardness of the filament! Ask our boy Zack over at Voidstar Labs

[–] TheTetrapod 9 points 4 months ago (1 children)

Bought one of these a while back, and it's been great. Yeah, you can get hundreds of cheapo nozzles for the price, but not having to deal with increasingly shitty prints and nozzle changes has made it worthwhile for me, at least. I don't even use abrasives, mainly just matte PLA.

[–] [email protected] 3 points 4 months ago

Ackschually

PLA is not abrasive by itself but it's additives might be. Titanium dioxide is a common colorant for example which might end up eroding your nozzle slowly.

load more comments (6 replies)
load more comments (14 replies)
load more comments (15 replies)