narF

joined 1 year ago
[–] [email protected] 1 points 2 months ago

So much Sony product!! 🫤

[–] [email protected] 4 points 2 months ago (1 children)

Isn't it difficult to setup?

[–] [email protected] 2 points 2 months ago* (last edited 2 months ago) (1 children)

So what if they continue to refuse to work after that if the contract is bad? Police are going to force them to work? Isn't that slavery?

[–] [email protected] 1 points 2 months ago (1 children)

We just have to find those bunkers and raid them! 😉

[–] [email protected] 1 points 3 months ago

What I ended up doing:

  • Moving the root partition from one partition to the other, using btrfs send | btrfs receive
  • Updated fstab to use the correct partitions
  • The computer kept using the old root partition then booting, I had to use ubuntu's boot repair (https://help.ubuntu.com/community/Boot-Repair) to fix that
  • I probably should have moved the home partition instead of the root one. I would have avoided much trouble.
[–] [email protected] 1 points 3 months ago* (last edited 3 months ago)

My understanding is that trams are much more cost effective long-term than buses, because the rails last much much longer than asphalt or even concrete.

They also have other benefits:

  • Smoother, less bumpy ride
  • Bigger capacity than buses, with the possibility to add up to 5 cars
  • Don't have to wait at traffic lights (We can install sensors to detect a tram is coming and switch the light so that it can go ahead without waiting. That's technically doable for an BRT/SRB, but it's more complex and as you can see, they didn't do it for SRB Pie-IX...🙁)
  • Less noisy
  • Easier to electrify
  • Easier to automate (make them self-driving)
  • No tires means less pollution
  • Grass can be added between the 2 rails, making it more pleasant looking, absorbing heat and noise
  • Level boarding make them more accessible
  • and more

You can see this thread for more benefits: https://www.reddit.com/r/notjustbikes/comments/qftru7/why_trams_and_trains_over_buses/

[–] [email protected] 1 points 3 months ago* (last edited 3 months ago) (1 children)

Can I do this while the system is running? I guess it would be safer to boot to a liveUSB before attempting this?

Also, what do you mean by "After a rebuild of the initrd" ? That's something I have to do after editing fstab? How do I do that?

 

Hi! I'm learning how to use btrfs and I need some advice.

One one of my desktop, I made the mistake of creating 2 partitions, one for /(root) and one for home. Both are btrfs. I didn't know that I could use subvolumes so that they could share the same physical space.

My question: How can I merge the root and home btrfs partitions into only 1 partition that would use btrfs subvolumes?

I'm looking for something like that:

  • Partition1 (btrfs)
    • subvolume 1: @root (mounted to /)
    • subvolume 2: @home (mounted to /home)
  • Partition 2, 3, 4...

My current setup:

  • 1 physical hard drive (1 TB), shown as sda below
  • The partitions I want to merge are sda7 and sda8
  • That computer is an iMac also running MacOS so it has a few other partitions that I should not touch
$ lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda      8:0    0 931,5G  0 disk 
├─sda1   8:1    0   200M  0 part /boot/efi
├─sda2   8:2    0 371,1G  0 part 
├─sda3   8:3    0 619,9M  0 part 
├─sda4   8:4    0   600M  0 part 
├─sda5   8:5    0  1023M  0 part 
├─sda7   8:7    0 422,9G  0 part /home
└─sda8   8:8    0 135,1G  0 part /
sdb      8:16   1     0B  0 disk 
sr0     11:0    1  1024M  0 rom  
$ blkid
/dev/sda4: UUID="d970eea2-142b-3f1c-9650-5e496d1e9b4b" BLOCK_SIZE="4096" LABEL="Linux HFS+ ESP" TYPE="hfsplus" PARTLABEL="Linux HFS+ ESP" PARTUUID="eab00592-b96d-4ecb-b2e9-816c95eaf860"
/dev/sda2: UUID="6a26963c-eabb-3e42-9e8d-8677a8282b61" BLOCK_SIZE="4096" LABEL="DD Macintosh" TYPE="hfsplus" PARTLABEL="DD Mac" PARTUUID="8257316c-1fd7-4885-bf2b-7e99557acd85"
/dev/sda7: UUID="22f5e59e-8509-484a-92d5-e7dc03bb70cd" UUID_SUB="78a998f5-db55-4a31-9506-afe548ec8d5e" BLOCK_SIZE="4096" TYPE="btrfs" PARTLABEL="Mint Home" PARTUUID="20b6c31d-5e2d-416f-beb3-faa295af67df"
/dev/sda5: UUID="587b0093-4b64-468a-9a01-b933630d184b" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="a47a3fbf-534a-435d-8916-0f83edebf296"
/dev/sda3: UUID="d0c171e8-572d-39f9-8bdc-38f33744a19a" BLOCK_SIZE="4096" LABEL="Recovery HD" TYPE="hfsplus" PARTLABEL="Recovery HD" PARTUUID="c9d0673b-bb2e-4322-9bf9-c661f7de6856"
/dev/sda1: LABEL_FATBOOT="EFI" LABEL="EFI" UUID="67E3-17ED" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="d30954cb-b9b6-40fa-9202-a18cf146f7df"
/dev/sda8: UUID="7027382a-4369-4276-b916-9997c1007e5b" UUID_SUB="3e516464-dee1-4bda-9621-29591d54dc2d" BLOCK_SIZE="4096" TYPE="btrfs" PARTLABEL="Mint root" PARTUUID="f2fdb8cc-54fd-46c8-bf1f-85954c1dc363"
[–] [email protected] 1 points 7 months ago

A few hundreads I think? Though I don't know how many are part of this working group. It's open though so you or anyone interested can join.

[–] [email protected] 1 points 9 months ago

Ça serait vraiment bien. Les tramways ont beaucoup d'avantages par rapport aux autobus.

 

Un petit jeu drôle et gratuit où tu es dans le rôle de Legault et tu dois tout faire pour retarder de négocier avec les travailleurs du secteur public.

[–] [email protected] 1 points 1 year ago

Coybow Beebop is super overly sexualised though 😕

[–] [email protected] 3 points 1 year ago

The reason places are too sparse is because cars. They take too much space.

 

Allo

I'm wondering if there is a way in Joplin (or with another app?) to transcribe hand written text Into plain text.

Basically, I'd like to have an archive copy of my personal journal in Joplin.

I would greatly prefer something open source that runs locally. Ideally free or cheap.

view more: next ›