kyle1320

joined 1 year ago
[–] kyle1320 6 points 9 months ago

Just like the hanging magnet is pulling on the car, the car magnet is also pulling on the hanging apparatus. Unfortunately for the car, the apparatus is attached to it, so it all cancels out.

[–] kyle1320 11 points 10 months ago

But only one word for all long stick-like things... Go figure

[–] kyle1320 27 points 11 months ago (3 children)

Maybe it's natural selection 🤔 everyone who could do it was just like 👍 yep I'm good 👍 and never had any kids.

[–] kyle1320 7 points 11 months ago

Encrypting your IP address would be like encrypting your mailing address. Like, ok buddy, but you're not going to be able to use that to receive any mail so not sure what your goal is -- you're still going to have to use your plain address if you want to receive anything.

[–] kyle1320 7 points 11 months ago (1 children)

If your weight increased to 20x your current weight, without changing proportions, you would be about 2.7x your current height, width, and depth.

...just like OP's mum.

[–] kyle1320 2 points 11 months ago (1 children)

Have you tried a double out of a ceramic cup?

Even aside from the thermal properties, the cup material itself can have an impact on how the flavors come through.

[–] kyle1320 3 points 1 year ago (1 children)

Hehe yes I made it 😁 you can see the corner of the Niche in the background. I had already decided to take a photo with my DSLR and happened to get a really good pour too. Thanks for the compliment -- it helps me validate my expensive hobbies 😂

[–] kyle1320 3 points 1 year ago (3 children)

Thanks! Definitely one of my better pours haha. Getting a machine with powerful steam (Lelit Elizabeth) helped a lot. Though the angle of the photo here hides the fact that it's actually pretty lopsided 😉

 
 
[–] kyle1320 14 points 1 year ago

US, specifically under "Social" apps.

[–] kyle1320 32 points 1 year ago* (last edited 1 year ago) (1 children)

Did you read the comments? The dev himself addressed the concerns, to the point where the OP updated his post (emphasis is mine)

Edit to say this blew up. I didn't realise I was kicking as big a hornet's nest and haven't read all the comments yet.

To be clear, what I don't like about this and other provisions in the terms is the language and implications around data use. I've no problem with ads being shown - I want developers to get paid for the work they do and that makes it possible for users to have "free" access to software if they can't afford to purchase.

I also want to add the response from Boost's dev below to make sure it's visible. You'll see that it is boilerplate but required by Google and was present in Boost for reddit. I just hadn't seen it because I purchased it immediately based on a recommendation. It doesn't make me happy about it but does remove some doubts I was having about the direction Boost is heading.

866
Go Boost, go! (lemmy.world)
submitted 1 year ago* (last edited 1 year ago) by kyle1320 to c/boostforlemmy
 

Currently #10 free social app on Google Play.

[–] kyle1320 2 points 1 year ago

Gotcha -- yeah I can confirm the thermocoil (at least in the BBP) isn't very stable. If you don't care about simultaneous steaming & brewing, to get good stability you could go for a single boiler machine with PID like the Profitec Go, Lelit Victoria, or Ascaso Steel Uno. Note the PID is important -- it's basically a smart controller to avoid the boiler overshooting the target temperature, so you get much better consistency.

[–] kyle1320 2 points 1 year ago (1 children)

In addition to measuring your output / a longer extraction, you can try a longer pre-infusion, or bumping up the temperature. 190F is on the very low end of what is usually considered ideal -- you could try aiming for 195 - 205. Also, if the portafilter is not fully heated that will offset the brew temperature and cause lower extraction.

 

When you're in the comments view for a post, and pull down to refresh, the comments will update but the main post info does not.

63
submitted 1 year ago* (last edited 1 year ago) by kyle1320 to c/[email protected]
 

Started a few years ago with a Stilosa and cheap burr grinder from Amazon. This hobby got me good 😅

8
submitted 1 year ago* (last edited 1 year ago) by kyle1320 to c/boostforlemmy
 

On a Pixel 7. I thought it might be a permissions issue but Android says no permissions have been requested by Boost.

 

Hopefully an easy one 😉

Thank you so much for all your work! I purchased ad-free right away and will buy fuel as I can to show my thanks.

view more: next ›