Just a quick note that even before our last meetup on Dec 21 you have a chance to check out the Monte Mare in Tegernsee with us on Dec 7.
We will take the train from Donnersberger Brücke at 1608 to reach Tegernsee final Stop in about an hour and then meet at the entrance with others that might join by car at 1730 like usually.
As always, I recommend to say hi and join on discord #meetups in Munich Tech Sauna for last minute info.
As the year draws to a close, we invite you to join us for a special Munich Tech Sauna meetup on December 21, 2023, at the renowned PhoenixBad in Ottobrunn. This unique venue, familiar to many of us, provides the perfect backdrop for a relaxing evening of tech discussions and year-end celebrations.
Event Details: Date: December 21, 2023 Time: 17:30 to 21:30 (meet 17:30 sharp at entrance/tickets) Location: PhoenixBad, Ottobrunn
Logistics: For newcomers, we recommend double-checking logistics to arrive on time. Meet us at the entrance/tickets at 17:30 (watch out for Munich Tech Sauna shirts and swag), secure your 4-hour ticket, and join our friendly community for an evening of relaxation and camaraderie.
Join Our Discord: Connect with our community on Discord before the event: Munich Tech Sauna Discord. Say hi, get to know everyone, and make the most of this enjoyable gathering.
This is a fantastic opportunity to unwind, celebrate the accomplishments of the year, and forge new connections within the tech community. We look forward
I built the rexxlp 12u a while ago but honestly 36 keys and miryoku is all I need. So when the 10u came out, thx @[email protected] I had to build it.
It was a tiny challenge for me, due to not properly following the guide. My big fat learning was that the tape on top of the sockets really really makes sense - I had some shorts between pins and then some socket pins were not even connected after I pulled out the board (XIAO ble) with too much force. Now I know.
What do you think?
Great progress on #revxlp 10u now that batteries arrives. This time, even with pogo pins...
Hardware assembly almost done. Just got some software issues now - like always I try to get #miryoku on and did build the uf2 file already (the same way I did for the 12u version... hmm), copied over. Now a few keys seem to work but emitting very unexpected (not my miryoku colemak mod dh) keys... Do we need a special miryoku build?
October will take us to a new #techsauna location - Olympia Schwimmhalle. Let's give it a try and enjoy the snow cabin, which is unique in Munich! They also have a lot of different saunas inside and outside as well as hourly cermonies. cu soon!
Oct 19 - 17:30 - Entrance of Olympia Schwimmhalle
18:00 first sauna ceremony
18:30 Salt application in the steam bath
19:00 sauna sauna
... visit the CafeBar for a beer? Or do they only have coffee? Let's figure that out!
20:00 try out some more sauna Fitness-Sauna?
21:00 final sauna session...
I am interested in the 3x5+3 version and would love to get Miryoku on it, plus of course the track pad needs to work, too. Is there an easy way, like a qmk workflow build that achieves this? Or another guide that describes it?
I still would love to build it but jlcpcb shows these mounting holes as not available... any better idea than just trying again every week?
Awesome, you deserve thx so much. I will try again soon as some of the components are not available, indeed. Would be nice to get it assembled fully.
Thx again - just printed the right side and was initially a bit worried about the snug fit, but after pushing it in a bit it simply fits perfectly!
Just fyi - bottom plate Gerber's for FR4 shows a 404 for me...
Would you say 10u PCBs ready to order? Would order with jlcpcb assembly...
Just checking - files/parts/build guide is not yet available, or did I miss it somewhere?
This is it - thx so much, let me know when you think it's ready and I am ready to build.
This sauna right at the lake Tegernsee is a true gem and some of us had already know this sauna from previous visits. It is well reachable from Munich Donnersbergerbruecke via BRB trains (included in 49 EUR ticket) and the proposed 4h slot from ~1730 on means we can reach one of the final trains back to Munich, leaving 21:52 from Tegernsee.
Note: you need a reservation for the weekends, book your guaranteed entrance reservation here (had this before, you will need to wait or cannot access at all - DO get a reservation!): https://www.monte-mare.de/tegernsee/4-stundenseesaunabuchen Book Arrival time 17-18:00 - 4h Ticket needs to be purchased on top at the entrance (31 EUR)
Train from Donnersberger Bruecke to Tegernsee (board the right part, most likely rear part) Donnersberger Bruecke 16:08-17:09 Tegernsee (last station)
Trains back to Donnersberger Bruecke 21:52, 22:52 (last train!)
Hello Hello! Good to see you here. I wish we had some more looking into our community here on Lemmy, it works amazingly well and I find it way easier and less cluttered than Reddit...
let me confirm it was an issue with karabiner-elements... I totally forget, thx for the great comments @[email protected] and @[email protected] I now just realize that the Miryoku Colemak DHK is also not the default, but I'll just swithc that back to default and it will most likely work!
thx all!
Oh no many others, some a bit over 36 keys, like piantor and revxlp... But just using 36 typically.
Chocofi is awesome, too. Also built crowboard, and a self-wired skeletyl but right side unfortunately refused to work... Need more time to look into it.
... plus figured out the basics of qmk. Will need to get it up and running with full miryoku though as this is what i use on ALL my keyboards. So if anyone can tell how i now get the full miryoku on I'd be super happy to give it a try.
This time, we're taking a unique turn and swapping the sauna for a relaxing gathering at the Munich Isarauen.
Event Details: Date: September 23, 2023 Time: 17:30 Location: Exact Maps Location
Let's make this meetup extra special by coming dressed with pants on (yes, you read that right!) and enjoy the beautiful outdoors together. This casual and laid-back setting will provide us with an opportunity to mingle, savor some delicious food, and sip refreshing drinks while connecting with like-minded individuals in the tech community.
What to Bring:
Getting There: The Isarauen spot is conveniently located near the Thalkirchen and Brudermuehlstrasse underground stations. Expect a pleasant 20-minute walk from there to the meetup location.
So, mark your calendars, pack your pants (and perhaps some sunscreen), and join us for an afternoon of networking, good food, and great conversations!
Looking forward to seeing you all there!
I might be able to bring some MetaBrewSociety beer - still got plenty left. I just hope the sauna is fine with that.