feecoomeeq

Hello. I bought a HP t630 and wanted to learn some ubuntuServer+Docker. My file structure looks like this:

/home/bg/docker_stacks (main folder)
/home/bg/docker_stacks/prod_php-maria-apache (this project folder)
/home/bg/docker_stacks/prod_php-maria-apache/docker-compose.yml

/home/bg/docker_stacks/prod_php-maria-apache/apache/

/home/bg/docker_stacks/prod_php-maria-apache/html/
/home/bg/docker_stacks/prod_php-maria-apache/html/test.php

/home/bg/docker_stacks/prod_php-maria-apache/php/
/home/bg/docker_stacks/prod_php-maria-apache/php/php.ini empty

inside test.php there's

inside docker-compose.yml there's:

GNU nano 6.2                                                                                                                                                                                       docker-compose.yml                                                                                                                                                                                                 
 web:
   image: php:8.2-cli
   ports:
     - '80:80'
   volumes:
     - /home/bg/docker_stacks/prod_maria-php-apache/apache:/etc/apache2/sites-enabled
     - /home/bg/docker_stacks/prod_maria-php-apache/html:/var/www/html
     - /home/bg/docker_stacks/prod_maria-php-apache/php/php.ini:/usr/local/etc/php/php.ini
   depends_on:
     - mariadb
   extra_hosts:
     - 'ax710.test:127.0.0.1'
     # - 'some-other-host.test:127.0.0.1'
   networks:
     - dev-env
 phpmyadmin:
   image: phpmyadmin:latest
   ports:
     - 8080:80
   environment:
     - PMA_ARBITRARY=1
     - PMA_HOST=mariadb
   depends_on:
     - mariadb
   volumes:
     - /home/bg/docker_stacks/prod_maria-php-apache/php/php.ini:/usr/local/etc/php/php.ini
   networks:
     - dev-env
 mariadb:
   image: mariadb:latest
   restart: always
   environment:
     MYSQL_ROOT_PASSWORD: '123'
     MYSQL_USER: 'bg'
     MYSQL_PASSWORD: '123'
     MYSQL_DATABASE: 'db'
   volumes:
     - mysqldata:/var/lib/mysql
   ports:
     - 3306:3306
   networks:
     - dev-env

volumes:
 mysqldata: {}

networks:
 dev-env: {}

When on my laptop I open:

192.168.1.208:9090 - cockpit works fine

192.168.1.208:8080 - phpMyAdmin works fine

heidiSQL - at 192.168.1.208 opens the database without problems

192.168.1.208:80/test.php or 192.168.1.208/test.php does not work

Any ideas how can I make test.php open in my browser? Any other suggestions are appreciated as I'am newbie in Docker.

https://lensdump.com/a/9lia7/?sort=title_asc&page=1

Long live Lemmy.

Hello Lemmies.

album with photos in order 1-7: https://lensdump.com/a/9Atmx/?sort=title_asc&page=1

EDIT: Direct links may be more convinient pic 1-7

https://i.lensdump.com/i/CbGQ5c.jpeg

https://i1.lensdump.com/i/CbGJv1.jpeg

https://i.lensdump.com/i/CbGtcQ.jpeg

https://i1.lensdump.com/i/CbGrOM.jpeg

https://i1.lensdump.com/i/CbGEDk.jpeg

https://i3.lensdump.com/i/CbGTse.jpeg

https://i2.lensdump.com/i/Cw2uL9.jpeg

I am new to 3d printing as I bought a used Ender3PRO. After initial problems with no adhesion I leveled the bed a couple of tiems. My method is to pinch the paper between the bed and the nozzle to grab and feel a strong friction taking out the paper-sheet. Then in PrusaSlicer I set the Z-offset to 0.2mm and it started printing fine-ish (pic.1, 2, 3 and 4). I made some printer vibrations dampener and figures (around 14 prints ~1,5h each). Next I printed a PS4 Slim Stand (pic.5) and separations between layers appeared.

I increased a bit the temp and run a second piece of the PS4 stand and a dissaster appeared (pic.6) and since then the adhesion to the bed is gone. One in 5 attempts with some glue the filament sticked to the bed, but the next layers have a lot of missplacements and eventually filament sticked arround the nozzle and a destroyed print.

The problems I noticed since the beginning:

1. adhesion is not great. The nozzle clean line is 80% of attempts dragged with the nozzle to the center of the bed when the brim starts printing. And gets curved just outside the hotend.
2. a 1-2mm of filament is always outside the nozzle (overextrusion?). I usually clean it with my fingers - wrong?
3. the printer has a glass bed but I would like to try using the magnetic Ender sheet. The glass is glued to the printer (pic.7)? Can I place the magnetic sheet on the glass? Should I then set Z-offset on the printer settings to avoid nozzle coliding with the bed?
4. On retraction, the extruder makes a loud click and sometimes a squeak. Is it normal?
5. I had a hard time to put the filament in the tube of the extruder. Like it was missplaced and had to bend the tip of the filament.
6. I washed the magnetic sheet with dish-soap and I'll try my chances today.
7. The PLA is black, stock Ender3 filament which I suppose is not best quality, but should be sufficient for start... Im also considering moisture in filament as I don't have a sperate room for my printer. Pic.6 - can it be caused by moisture?
8. After what happender on Pic.6 the extrusion was really poor which I think was due to clogged nozzle. After heating to 240*C, pulling out the filament, needle-cleaning the nozzle the amount of filament extruded returned to what it was at start.

Some settings:

• 205C and 60C for first layer
• 200C and 55C for the rest
• retraction ON
• no Z-hop (I'll try to avoid it for now, since it didn't help)
• brim on
• 0,2 layer height
• first layer speed 20mm/s, rest ~40mm/s

Any advice welcome and I'll provide more info if You have any questions.