Erasmus

Just got a new PSVR2 yesterday and am loving it! However as luck would have it, first time putting it on I smeared my greasy forehead across the lenses (nice!!)

So I looked up about cleaning and first thing I see is not to use the usual glass cleaners. The PlayStation site says to just use your typical lens cloth only but that is only going to smear the grease. As a person who wears glasses I have plenty of experience with that daily.

So what experience does everyone else out there have with this and what do you guys use? I know with my LCD TVs I have found a mixture of vinegar and water and a microfiber cloth works to remove greasy finger prints but didn’t know if that was safe for the lenses.

Posted this earlier in PlayStation but am trying here as well:

Hey guys - I know this is a slightly older game but wanted to see if anyone had ran into this in the past (or present).

I recently got a PS5 and my wife got me a few games for my birthday. DMC5 was one of them. I went to install it and it would not go past 99% no matter how long it was left (eg hours). Even after deleting several times, rebooting, etc.

After some googling I ran across an article posted elsewhere on the web that discussed a similar problem with other games that solved the issue with disconnecting from the internet then doing the install, then reconnecting. I tried that and the install worked. It seemed to then check about an update, did it and I went about playing. I played for several levels as Nero and checked online - saw there were multiple add ons (red and blue orbs I believe for a buck or so) and went ahead and grabbed them. It added them to my account when I logged back in. So far so good.

I tried later to add more red orbs - it would let me buy them on the PlayStation store but when I log in it is not adding them to the account (I can see them in the transaction history on my PS5) but no matter what I do they do not add. Other weird thing - I cannot seem to access the store via the game for some reason. I have uninstalled and reinstalled it - again - and still nothing. I had to do the internet disconnect as well this time to get it installed.

Anyone else had this problem with the game or any add ons? This is the disc version just to clarify. The first add ons worked fine for whatever reason.

Hey guys - I know this is a slightly older game but wanted to see if anyone had ran into this in the past (or present).

I recently got a PS5 and my wife got me a few games for my birthday. DMC5 was one of them. I went to install it and it would not go past 99% no matter how long it was left (eg hours). Even after deleting several times, rebooting, etc.

After some googling I ran across an article posted elsewhere on the web that discussed a similar problem with other games that solved the issue with disconnecting from the internet then doing the install, then reconnecting. I tried that and the install worked. It seemed to then check about an update, did it and I went about playing. I played for several levels as Nero and checked online - saw there were multiple add ons (red and blue orbs I believe for a buck or so) and went ahead and grabbed them. It added them to my account when I logged back in. So far so good.

I tried later to add more red orbs - it would let me buy them on the PlayStation store but when I log in it is not adding them to the account (I can see them in the transaction history on my PS5) but no matter what I do they do not add. Other weird thing - I cannot seem to access the store via the game for some reason. I have uninstalled and reinstalled it - again - and still nothing. I had to do the internet disconnect as well this time to get it installed.

Anyone else had this problem with the game or any add ons? This is the disc version just to clarify. The first add ons worked fine for whatever reason.

Hello all - so I have been looking at the VR headset and have a couple questions.

First one is my main concern. I wear glasses, mainly for distance vision. However, here recently I have found I had to get my prescription tweaked to include bifocals for reading (aging sucks). That being said - can you wear glasses with the VR unit and does it matter if you are nearsighted/farsighted or how does that work?

Second question - I know there are games made primarily for VR but will any game work with it? Obviously I cannot imagine playing something like Diablo but am thinking maybe Doom or Genshin Impact?

Hello all - so I have been looking at the VR headset and have a couple questions.

First one is my main concern. I wear glasses, mainly for distance vision. However, here recently I have found I had to get my prescription tweaked to include bifocals for reading (aging sucks). That being said - can you wear glasses with the VR unit and does it matter if you are nearsighted/farsighted or how does that work?

Second question - I know there are games made primarily for VR but will any game work with it? Obviously I cannot imagine playing something like Diablo but am thinking maybe Doom or Genshin Impact?

Hello all. Just wondering if anyone has come across or might be using any other resources? I am a regular Duolingo Spanish user but didn’t know if there might be anything else people use or watch.

News was one thing I had heard at one time a long time ago someone told me that they had watched - something that was dual broadcast (?) but I cannot seem to locate it now.

Just wondering if anyone has any experience with them, got one, etc.

I had been eyeing the Revopoint brand but keep hesitating on buying. I don’t know anyone that has one and really would like to get more feedback. The Amazon reviews seem decent enough.

I am looking for something that can scan objects about hand size or larger and that I can walk around the object scanning. I don’t want to be limited to sticking the object on a scanning mat or turntable. I’m not going to be scanning minis (eg Warhammer). I do use the iOS and OSX platforms.

Good day all. Am a fairly new user and was wondering if there is one of the mobile apps that has mod tools added to it yet? Thanks in advance.

So am looking for some suggestions to try. I am printing on an Ender 3 with a MS direct drive setup.

I am using Amolen wood filament and switched the nozzle to a .8

I did test prints for everything I could think: retraction, speed, temperature, etc and picked the ones that looked the smoothest of each.

I did the PID tuning as well on the nozzle.

However, I have never printed with a nozzle this size. I tried with this filament and .4 and got non stop clogging. Some reading online lead me to think that maybe it needed to be larger since it seemed to flow so easily.

Well I got it flowing great but the tops or where the layers change look a litttle rough as you can see. I don’t know if this is something I missed in my settings or if this is due to the size of the nozzle and wanted to get some input.

The sidewalks are perfectly smooth - if that makes any difference.

Forgive me if this is truly a stupid question but I cannot find the answer and I have been afraid to ask.

Am attaching a screen shot to assist my babbling below.

When surfing thru the various communities (and please feel free to correct me if I use a wrong term here) I will see many that have the same name but only difference is that at the end of that name, there is an ‘@xyz.ca’ or similar.

I assumed these were just the same communities only started on different servers?

However I have seen several - like the one where my arrow points to that doesn’t have an ‘@‘ location at the end of it. Can someone explain to me the difference here? Thanks