this post was submitted on 23 Aug 2023
68 points (97.2% liked)

What is this thing?

5519 readers
329 users here now

Let us help you identify that mysterious object you’ve found.

Currently in CHALLENGE mode: If you've got something obscure knocking about, post a picture, and let's see how we do. Please prefix such posts with "CHALLENGE:" so we know we've got a fighting chance.

founded 1 year ago
MODERATORS
 
all 12 comments
sorted by: hot top controversial new old
[–] [email protected] 57 points 1 year ago

Looks like an exhaust system- the hose sits on the engine exhaust pipe and the blower on the ceiling vents the fumes out to the roof.

[–] [email protected] 44 points 1 year ago

So you don't get carbon monoxide poisoning from running the vehicle in an enclosed bay. They hook that up to the exhaust of the vehicle and blow it outside.

[–] DEngineer 6 points 1 year ago (1 children)

What are the other two that are down hooked up to?

[–] yokonzo 1 points 1 year ago
[–] [email protected] 5 points 1 year ago

Looks like extraction. Motor at the top, and duct through the roof…

[–] ladicius 4 points 1 year ago

To suck engine exhaust to the outside? Start the fan first, then hook the tube to the engine exhaust.

[–] [email protected] 3 points 1 year ago

Looks like an air exhaust. You can see the blower on the left. And then it connects to the top of the roof. To exhaust. It might run in reverse pulling fresh air in. Not sure. But as you can see in the photo other examples of this tube being pulled down to the work area. So if you're working on an engine you don't want to asphyxiate your workers you would need to exhaust the exhaust

[–] Puttaneska 0 points 1 year ago (1 children)

This would make sense, although I seem to remember being told that hosing can be used to pump warm air from the top of the warehouse down. So cheap , environmentally friendly heating.

If OP knows weather it sucks or blows, we might have this one solved!

[–] [email protected] 5 points 1 year ago

You can see that the hose enters the center of a centrifugal blower, which is the inlet, so the hoses are sucking.