this post was submitted on 30 Nov 2024
144 points (96.8% liked)

Videos

14365 readers
204 users here now

For sharing interesting videos from around the Web!

Rules

  1. Videos only
  2. Follow the global Mastodon.World rules and the Lemmy.World TOS while posting and commenting.
  3. Don't be a jerk
  4. No advertising
  5. No political videos, post those to [email protected] instead.
  6. Avoid clickbait titles. (Tip: Use dearrow)
  7. Link directly to the video source and not for example an embedded video in an article or tracked sharing link.
  8. Duplicate posts may be removed

Note: bans may apply to both [email protected] and [email protected]

founded 2 years ago
MODERATORS
all 23 comments
sorted by: hot top controversial new old
[–] [email protected] 32 points 4 days ago (3 children)

This isn't what Christmas looks like. It's what a vape shop looks like. Or, worse, a gaming PC.

πŸ˜†

My only gripe with the LED ones is that they always seem to have a high-frequency flicker which gives me a headache. Other people have told me they don't notice it, but I do. I wanted to replace the clear incandescent ones with LED but couldn't deal with the flicker.

[–] Brokkr 13 points 3 days ago* (last edited 3 days ago) (2 children)

It is either a ~~30~~ 60 or ~~60~~ 120 Hz flicker, depending on how they built the electronics. It is ~~30~~ 60 Hz if they didn't include an inverter and ~~60~~ 120 Hz if they did.

Without an inverter, it will be off for 50% of the time. With an inverter, it will always be on, but sometimes dim.

With better electronics, it will be steady on, but that's not common in christmas lights.

[–] 9point6 8 points 3 days ago

Not strictly always true, if the lights have any kind of dimming capability (like many of the ones with automated patterns) you'll likely be dealing with PWM which means the time spent lit can vary significantly

[–] [email protected] 4 points 3 days ago (1 children)

Wouldn’t that be 60 Hz without a rectifier, and 120 Hz with one? If the voltage crosses zero twice per cycle, but goes negative only once.

[–] Brokkr 4 points 3 days ago

Yep, you're right. Had the 2 on the wrong side. Fixing.

[–] [email protected] 8 points 3 days ago

But capacitors are so expensive, it's like a whole 10Β’ extra to filter it out so it doesn't flicker!

[–] [email protected] 6 points 3 days ago (2 children)

I have 1,000% light perception, I notice the flicker on almost every LED I've ever seen.

[–] [email protected] 3 points 3 days ago

I worked with a guy who had the opposite. He couldn't tell how flickery his screen was.

[–] [email protected] 1 points 3 days ago

My parents’ new house has all 60hz LED lights and I can’t stand being in there

[–] [email protected] 14 points 3 days ago

Hopefully this gets some other manufacturers on board. 25 a set adds up quick, but I'm willing to slowly buy some over the next few years cause these look amazing.

[–] [email protected] 11 points 3 days ago* (last edited 3 days ago) (1 children)

Hopefully this doesn't mean the end of the yearly Christmas light adventures. They were my favorite videos!

[–] Ghostalmedia 10 points 3 days ago

I guess it’s back to heat pumps.

[–] [email protected] 8 points 3 days ago* (last edited 3 days ago) (1 children)

Here I am still using the old as fuck Christmas lights from the 80s or something my parents always used when I was a kid. Incandescent. White. The color is from the tinted glass surrounding the actual bulb. If one light dies, so does the entire string after it. You don't wanna use them on the tree because they get hot as fuck and could light that shit on fire.

[–] Psythik 4 points 3 days ago* (last edited 3 days ago) (2 children)

I only buy incandescents because I can't stand cold, flickery LEDs. Christmas for me is about that feeling of warmth and nostalgia for childhood. There is no reason why LEDs should be like this, so I can't wait to watch the video to see how well they fixed them.

Edit: God damnit; even the lights featured in the video still flicker. So I will still be sticking with incandescent. Why can they make flicker-free LED and OLED TVs, but nobody can do the same for Christmas lights? For the first time ever, Alec has let me down.

[–] [email protected] 3 points 3 days ago

Same. I've tried LEDs and they really don't cut it for christmas lights, so I stick with incandescent, at least in the house. LEDs outside might be fine, but I rarely get around to putting up outside decorations.

[–] [email protected] 2 points 3 days ago

Completely agree about how horrible flicker is. There are occasional leds that don't flicker. I believe (but I'm not sure) that they have to have am ac/dc converter. AC causes the flicker, but Direct Current delivers steady constant power. I have a random string light set that has (what i believe is) an ac/dc converter wall wart, and it doesn't flicker at all. It's just a random set I bought from a store.

[–] ThePantser 3 points 3 days ago* (last edited 3 days ago)

And here I am with this as my tree in my garage. It's 720 LEDs, 12v ws2812 strips on a tinsel tree.

Image

[–] acosmichippo 2 points 3 days ago

i got giant ceramic multicolored C9 LED lights from amazon and absolutely love them. never liked the tiny lights.

[–] [email protected] -4 points 3 days ago (1 children)

But then in the middle of the video he completely ignores the problem of LED flicker!!!

[–] stankmut 6 points 3 days ago (1 children)

He brings up LED flicker multiple times.

[–] [email protected] -4 points 3 days ago (1 children)

But he says it's not a big deal, and I strongly disagree

[–] Juvyn00b 6 points 3 days ago

Sure! He has an opinion, and you have an opinion - and you're both right!