Blender

My only question is why that car?

I own this car. It was easy for me to get photos of various things that helped modelling the structure.

without a doubt the worst vehicle I’ve ever driven

I've driven worse. But I can see your point. Compared to other cars there is not much comfort in driving. You always have to account for the price this vehicle is being sold (for this model in particular the price for a brand new car was at 10.000 €, with the most basic trim an the basic 1-l-engine). However, my car even has AC (for overtaking another vehicle one needs to switch it off so you have more power to the engine) and electric windows (but no switch on the drivers side for the passenger door). And it has a real dashboard with the instruments on the drivers side behind the steering wheel and a glove box with lid on the passenger side. Most small cars have that weird arrangement where the instruments are located in the center console and just a shelf for a glove box. When I was in Bavaria with its hill topography I had to even shift into lower gears on the autobahn because the engine is so weak - a thing which todays cars is not usual anymore. But fuel consumption ( - 4.8 l/100 km or 49 MPG) as well as maintenance (no issues so far at - 120.000 km or 74564 miles) and taxation is very wallet friendly - and it beats walking!

I start with the easiest part: The gas tank cap on the rear left side and the towing hook cap on the right front bumper. These parts were done surprisingly fast (15 min. each). Also the lock on the drivers door (5 min.).

Most tedious: the windshield wipers. Mostly because they were so small compared to the rest of the cars parts, which made it hard to navigate and zoom (already switched the units to millimeters, but still), and all three (2 in front, 1 in back) were individually shaped, so no mirror modifier could be applied). I just had to pull through during weekdays evenings. I would guess it took me 10 hours for all of them.

Medium: the front bumper with the fog lights and the lower grille as well as the upper grille: This took me a whole Saturday and Sunday; the upper grille was made during the weekdays - I would say 3 - 4 hours.

Hard: the inner structure of the front light. I had multiple photos of the light from top, side, front, etc. The main problem was that this thing is made of chrome (and plastic probably) which it made it hard to see the form/shape. And since everything else is made with eye measure, I had to alter the size and proportions to fit into the model. The problem was that when I (thought) I was finished, it stuck out of the side of the front glass cover. So I had to scale it down and had to re-arrange everything. I also made some simplicfications for the reflector. In the model it looks more like a disco ball. That is not the case with the real thing, but it was easier to merge a sphere with extruded lines to archive the relector-type appearence. See photos. This part took me the longest. I would guess it took the whole weekend (Saturday and Sunday) as well as some days during the week - approximately 25 - 30 hours.