this post was submitted on 06 Nov 2023
19 points (91.3% liked)

homeassistant

12218 readers
96 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
 

I'm setting up with HA and zigbee smart bulbs. I've got a few automations already set up, such as turning on a bunch of lights in the morning and turning most of them off again at night.

All these lights still have physical switches. I don't want to take those switches out for lots of reasons, and putting smart switches there seems like overkill when the bulbs are already smart. What are people doing with their physical light switches to ensure that they don't get flipped?

Ideas I've had:

  • some kind of physical plastic covering that fits snugly around it. I'd probably do this if I had a 3d printer, but I don't. Maybe someone sells a thing like this? More just a reminder not to touch them.
  • Carefully paint the switches a different color (perhaps the HA color scheme?). Again, basically just a reminder. This especially makes sense with a few multi-switch plates where some of the connected lights are automated and some are intentionally left manual.
  • Entirely replace the plate with a smart switch? Besides incurring a nontrivial cost and being a bunch of work to install, this won't even help me with the aforementioned multiswitch plates. I don't want all my lights automated.

Other ideas?

you are viewing a single comment's thread
view the rest of the comments
[–] solidgrue 4 points 1 year ago

I have Decora style dumb switches on some fixtures.with smart bulbs, and just use white vinyl electrical tape to tape the edge of the rocker down. Keeps the family from turning stuff off by accident, for the most part.

Low tech, but it works.